more | Ansmann 1/10 Clash 21T 540 Motor Single Wind (125000012)
The Ansmann range of motors offer superb value to the entry level racer. With pre-fitted bullet style connectors they're literally Plug-n-Play!
The 21T is generally the best first step up motor, not too thirsty on the battery, and efficient (9A) enough to be used with standard Electronic Speed Controllers. Revving at 25,000RPM it gives a noticable difference in performance from a standard 540 motor. | |
more | Ansmann Powerjack 6 Delta Pro (152100080)
This neat little plug-top charger will charge a standard 1500Mah 7.2v racing pack in 6 hours, with a safe delta peak charge, switching to trickle charge. Also suitable for higher capacity NiMh battery packs, this is an ideal entry level mains charger | |
more | Ansmann 7.2v 3900mAh NiMH Racing Pack (161000090)
Want more Bang for your Buck? Maybe this is the answer. The Ansmann 3900Mah is a huge capacity battery, great when running models with high performance motors where you need more punch. | |
more | Ansmann Spiraltube 1.5mm Blue (186000040)
| |
stock
info | Ansmann Spiral Guard Tube 5.mm 1Mtr Length (186000070)
| |
more | Ansmann Lexan Curved Scissors (201000016)
These curved scissors are a must for cutting out bodyshells. The curved profile follows the wheel arch of you RC car body perfectly, leaving you without the hassle of tidying up after making a messy job. Great as a compliment to any of our unfinished bodyshells. | |
more | Ansmann 75mm Aluminium Shock Set pair (201000037)
These shocks come supplied with aluminium cylinder bodies, and high quality anodised coil springs. Becase of the oil filled nature of these units they offer a damped suspension, typically used in racing trucks and buggies. | |
stock
info | Ansmann Pair Of Aluminium Shocks 85mm Length (201000038)
| |
more | Ansmann Piston Stopper (201000070)
| |
stock
info | Ansmann 1/10 Body Shell Muffler Big Bore Detail Set Chrome (201000114)
| |
stock
info | Ansmann 1/10 Body Shell Muffler Twin Pipe Chrome (201000115)
| |
stock
info | Ansmann 1/10 Body Shell External Mirrors Chrome (201000116)
| |
stock
info | Ansmann 1/10 Body Shell Wiper Set Chrome 2pcs (201000117)
| |
more | Ansmann Body Clips Pack Of 10 Small Silver (203000080)
| |
more | Ansmann Body Clips 10 pcs Large Silver (203000082)
| |
stock
info | Ansmann Aluminium Car Stand For 1/10-1/8 (203000090)
| |
stock
info | Ansmann Long Blue Body Clips Pack of 4 (203000097)
| |
stock
info | Ansmann Extra Long Silver Body Clips 4 pcs (203000098)
| |
stock
info | Ansmann 1/10 Pullstart Assy. For Force Engines 15/28 (223000005)
| |
more | Ansmann 1/8 Extreame Series 1 Buggy Painted Bodyshell (242000001)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit many 1/8 scale buggys, such as the EB4. | |
more | Ansmann 1/8 Extreame Series 2 Buggy Painted Bodyshell (242000002)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit many 1/8 scale buggys, such as the EB4. | |
more | Ansmann 1/8 Extreame Series 4 Buggy Painted Bodyshell (242000004)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit many 1/8 scale buggys, such as the EB4. | |
more | Ansmann 7.2v Slow Charger / Transmitter Charger adap inc (AC8)
This neat little plug-top charger will charge a standard 1500Mah 7.2v racing pack in 8 hours, with a safe trickle charge. Also suitable for higher capacity NiMh battery packs, this is an ideal entry level mains charger. A TX charger lead is also included for charging transmitter packs. | |
more | Ansmann 1/10 Clash 15 540 Motor Single Wind (125000010)
The Ansmann range of motors offer superb value to the entry level racer. With pre-fitted bullet style connectors they're literally Plug-n-Play!
The 15T is a great option if you're racing 2wd buggies or salloons at club level. With a current drain of 16A you may need to invest in a new Electronic Speed Controller and a high capacity racing pack to run this motor, but with a rev range of 32,000RPM this motor's performance will blow the opposition away! | |
more | Ansmann 1/10 Clash 18 540 Motor Single Wind (125000011)
The Ansmann range of motors offer superb value to the entry level racer. With pre-fitted bullet style connectors they're literally Plug-n-Play!
The 18T is a great option if you're racing 2wd or 4wd buggies or salloons at club level. With a current drain of 12A you may need to invest in a new Electronic Speed Controller to run this motor, but with a rev range of 28,000RPM it's worth the expense. | |
more | Ansmann 6v RX Pack 1200Mah Flat Jr Plug (163000110)
| |
more | Ansmann 6v RX Pack 1200Mah Hump Style Bec Plug (163000120)
| |
more | Ansmann 6v RX Pack 2700Mah Sub-C Tamiya/Bec Plugs (163000200)
| |
more | Ansmann High Power Connector Deans Style 1Pr Red (184000090)
| |
more | Ansmann Spiraltube 1.5mm Black (186000010)
| |
more | Ansmann Shock Absorber Set Pk4 to Fit Tamiya TL01 (201000018)
These shocks come supplied with aluminium cylinder bodies, and high quality anodised coil springs. Becase of the oil filled nature of these units they offer a damped suspension, typically used in racing trucks and buggies. This set of four shocks will improve the handling of your Tamiya TL01 chassis in on quick upgrade. | |
stock
info | Ansmann 4 Way Wrench 7/8/10/12/17mm (201000033)
| |
more | Ansmann Body Post Marker Set (201000035)
These body markers are a great new innovation. As not all chassis have the same mounting points, most bodyshells are supplied without the post holes cut. These natty little devices fit over the top of the body posts, so when you press down the uncut bodyshell over the chassis, the positions are marked ready for cutting - Simple & Brilliant!! | |
more | Ansmann 95mm Aluminium Shock Set pair (201000039)
These shocks come supplied with aluminium cylinder bodies, and high quality anodised coil springs. Becase of the oil filled nature of these units they offer a damped suspension, typically used in racing trucks and buggies. | |
more | Ansmann Four Screwdriver Set 1.5/2/2.5/3mm Metal Handles (203000070)
| |
more | Ansmann Body Clips Pack Of 10 Medium Silver (203000081)
| |
stock
info | Ansmann Extra Long Green Body Clips 4 pcs (203000096)
| |
more | Ansmann 1/10 Sparkling Drift Chrome Wheel And Tyre Set 4pcs (211000049)
| |
more | Ansmann 1/8 Blue Chrome Minion Wheels & Tyre Set (214000003)
These high quality wheels and tyres from Ansmann offer great value for money. The tyres are produced from a high density rubber compound to give fantastic durability, the tread pattern is especially designed for off-road mayhem. The wheels are supplied in a variety of stylish designs. Fitting on a standard hex style adapter these wheel and tyre sets will fit most contemporary 1/8 scale buggies. | |
more | Ansmann 1/8 Chrome Red Saw Wheels & Tyres (214000005)
These high quality wheels and tyres from Ansmann offer great value for money. The tyres are produced from a high density rubber compound to give fantastic durability, the tread pattern is especially designed for off-road mayhem. The wheels are supplied in a variety of stylish designs. Fitting on a standard hex style adapter these wheel and tyre sets will fit most contemporary 1/8 scale buggies. | |
more | Ansmann 1/8 Razor Tyres With Insert One Pair (216000021)
Ansmann tyre are supplied in a high density rubber compound, giving great durability. These Razor pattern tyres will give good traction on dirt track and gravel, and fit most contemporary 1/8 scale buggy hubs. | |
more | Ansmann 1/10 Extreme Painted Bodyshell 190mm (241000018)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit all most all tamiya or rc cars with the right bodyposts, Wheelbase 250mm | |
more | Ansmann Body Reamer (203000009)
This tapered reamer is a great tool for cutting holes for body posts into Lexan or Polycarbonate bodies. Ideally use the Ansmann Body Post Marker set to position the area to be cut, then gently twist out the body post holes with this handy tool. | |
Antics
Search
Index
Checkout
Back