Contact Mail Order Hotline on 01453 825 381 or email enquiries@antics.ltd.uk
0 Items
Subtotal: £0.00
checkout
> Tools, Paints & Scenics > Materials > Plastic Sheet & Shapes > Plastruct Sections

More info

Plastruct 1.2mm 90-Degree Angle Pack of 10 AFS-1 90501

1.2mm x 1.2mm (0.050in/50thou) 90 degree angle section, 0.4mm (0.015in/15thou) thick.
Pack of 10 lengths, each 250mm (10in) long.

'Angle iron' is one of the most common basic sections. The right angle is used to make and reinforce right-angled joints, while the inherent the resistance to bending is used for light duty stiffening struts and bracing between columns and beams. Angle is also used to strengthen sheets, keeping flat surfaces flat and is ideal to make a hidden internal supporting structure for model buildings, using the moulded angles to keep corners square.


Read more...
Stock:
Website: 1
Available from shops: Bristol: 1, Cardiff: 2, Gloucester: 4, Plymouth: 1, Stroud: 1(explain)
(Prod Ref #2030)
Price: £8.15


More info

Plastruct 1.6mm 90-Degree Angle Pack of 10 AFS-2 90502

1.6mm x 1.6mm (0.060in/60thou) 90 degree angle section, 0.5mm (0.020in/20thou) thick.
Pack of 10 lengths, each 250mm (10in) long.

'Angle iron' is one of the most common basic sections. The right angle is used to make and reinforce right-angled joints, while the inherent the resistance to bending is used for light duty stiffening struts and bracing between columns and beams. Angle is also used to strengthen sheets, keeping flat surfaces flat and is ideal to make a hidden internal supporting structure for model buildings, using the moulded angles to keep corners square.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 4, Cardiff: 3, Coventry: 3, Gloucester: 2, Plymouth: 1, Stroud: 3(explain)
(Prod Ref #2031)
Price: £8.80


More info

Plastruct 2.4mm 90-Degree Angle Pack of 8 AFS-3 90503

2.4mm x 2.4mm (0.1in/100thou) 90 degree angle section, 0.6mm (0.025in/25thou) thick.
Pack of 8 lengths, each 380mm (15in) long.

'Angle iron' is one of the most common basic sections. The right angle is used to make and reinforce right-angled joints, while the inherent the resistance to bending is used for light duty stiffening struts and bracing between columns and beams. Angle is also used to strengthen sheets, keeping flat surfaces flat and is ideal to make a hidden internal supporting structure for model buildings, using the moulded angles to keep corners square.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 1, Gloucester: 4, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2032)
Price: £9.05


More info

Plastruct 3.2mm 90-Degree Angle Pack of 7 AFS-4 90504

3.2mm x 3.2mm (0.125in/125thou) 90 degree angle section, 0.8mm (0.030in/30thou) thick.
Pack of 7 lengths, each 380mm (15in) long.

'Angle iron' is one of the most common basic sections. The right angle is used to make and reinforce right-angled joints, while the inherent the resistance to bending is used for light duty stiffening struts and bracing between columns and beams. Angle is also used to strengthen sheets, keeping flat surfaces flat and is ideal to make a hidden internal supporting structure for model buildings, using the moulded angles to keep corners square.


Read more...
Stock:
Website: 1
Available from shops: Bristol: 1, Cardiff: 3, Coventry: 2, Gloucester: 3, Plymouth: 3(explain)
(Prod Ref #2033)
Price: £9.25


More info

Plastruct 4.8mm 90-Degree Angle Pack of 5 AFS-6 90505

4.8mm x 4.8mm (0.19in/190thou) 90 degree angle section, 0.8mm (0.030in/30thou) thick.
Pack of 5 lengths, each 610mm (24in) long.

'Angle iron' is one of the most common basic sections. The right angle is used to make and reinforce right-angled joints, while the inherent the resistance to bending is used for light duty stiffening struts and bracing between columns and beams. Angle is also used to strengthen sheets, keeping flat surfaces flat and is ideal to make a hidden internal supporting structure for model buildings, using the moulded angles to keep corners square.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 2, Coventry: 4, Gloucester: 4, Plymouth: 3(explain)
(Prod Ref #2034)
Price: £8.80


More info

Plastruct 6.4mm 90-Degree Angle Pack of 5 AFS-8 90506

6.4mm x 6.4mm (?in/250thou) 90 degree angle section, 0.9mm (0.035in/35thou) thick.
Pack of 5 lengths, each 610mm (24in) long.

'Angle iron' is one of the most common basic sections. The right angle is used to make and reinforce right-angled joints, while the inherent the resistance to bending is used for light duty stiffening struts and bracing between columns and beams. Angle is also used to strengthen sheets, keeping flat surfaces flat and is ideal to make a hidden internal supporting structure for model buildings, using the moulded angles to keep corners square.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 2, Gloucester: 2, Plymouth: 4, Stroud: 1(explain)
(Prod Ref #2035)
Price: £9.80


More info

Plastruct 7.9mm 90-Degree Angle Pack of 4 AFS-10 90507

7.9mm x 7.9mm (5/16in) 90 degree angle section, 0.9mm (0.035in/35thou) thick.
Pack of 4 lengths, each 610mm (24in) long.

'Angle iron' is one of the most common basic sections. The right angle is used to make and reinforce right-angled joints, while the inherent the resistance to bending is used for light duty stiffening struts and bracing between columns and beams. Angle is also used to strengthen sheets, keeping flat surfaces flat and is ideal to make a hidden internal supporting structure for model buildings, using the moulded angles to keep corners square.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Available from shops: Bristol: 4, Cardiff: 4, Coventry: 2, Gloucester: 5, Plymouth: 1, Stroud: 1(explain)
(Prod Ref #2036)
Price: £9.60


More info

Plastruct 9.5mm 90-Degree Angle Pack of 4 AFS-12 90508

9.5mm x 9.5mm (1/8in/375thou) 90 degree angle section, 1.1mm (0.045in/45thou) thick.
Pack of 4 lengths, each 610mm (24in) long.

'Angle iron' is one of the most common basic sections. The right angle is used to make and reinforce right-angled joints, while the inherent the resistance to bending is used for light duty stiffening struts and bracing between columns and beams. Angle is also used to strengthen sheets, keeping flat surfaces flat and is ideal to make a hidden internal supporting structure for model buildings, using the moulded angles to keep corners square.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 1, Cardiff: 3, Coventry: 4, Gloucester: 3, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2037)
Price: £10.10


More info

Plastruct 1.2mm T Section Pack of 10 TFS-1 90561

1.2mm (3/64in) T section. 1.2mm width and overal height of T section in 0.4mm (15 thou) thick styrene.
Pack of 10 lengths each 250mm (10in) long.

The central leg of the T provides resistance to bending, so T section is often used as supporting posts or strapping for walls, fences and the side planking of railway wagons.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 4, Cardiff: 5, Coventry: 3, Gloucester: 3, Plymouth: 1, Stroud: 3(explain)
(Prod Ref #2102)
Price: £8.15


More info

Plastruct 1.6mm T Section Pack of 10 TFS-2 90562

1.6mm (1/16in) T section. 1.6mm width and overal height of T section in 0.5mm (20 thou) thick styrene.
Pack of 10 lengths each 250mm (10in) long.

The central leg of the T provides resistance to bending, so T section is often used as supporting posts or strapping for walls, fences and the side planking of railway wagons.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 6, Cardiff: 3, Coventry: 1, Gloucester: 3, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2103)
Price: £8.80


More info

Plastruct 2.4mm T Section Pack of 8 TFS-3 90563

2.4mm (3/32in) T section. 2.4mm width and overal height of T section in 0.8mm (30 thou) thick styrene.
Pack of 8 lengths each 375mm (15in) long.

The central leg of the T provides resistance to bending, so T section is often used as supporting posts or strapping for walls, fences and the side planking of railway wagons.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 3, Coventry: 2, Gloucester: 3, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2104)
Price: £9.10


More info

Plastruct 3.2mm T Section Pack of 7 TFS-4 90564

3.2mm (1/8in) T section. 3.2mm (3/32in) width and overal height of T section in 1.0mm (40 thou) thick styrene.
Pack of 7 lengths each 375mm (15in) long.

The central leg of the T provides resistance to bending, so T section is often used as supporting posts or strapping for walls, fences and the side planking of railway wagons.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 4, Cardiff: 4, Coventry: 2, Gloucester: 2, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2105)
Price: £9.25


More info

Plastruct 4.8mm T Section Pack of 5 TFS-6 90565

4.8mm (3/16in) T section. 4.8mm width and overal height of T section in 0.8mm (30 thou) thick styrene. Pack of 5 lengths each 600mm (24in) long.

The central leg of the T provides resistance to bending, so T section is often used as supporting posts or strapping for walls, fences and the side planking of railway wagons.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 2, Cardiff: 2, Gloucester: 3, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2106)
Price: £8.80


More info

Plastruct 6.4mm T Section Pack of 5 TFS-8 90566

6.4mm (1/2in) T section. 4.8mm (3/16in) width and overal height of T section in 0.9mm (35 thou) thick styrene. Pack of 5 lengths each 600mm (24in) long.

The central leg of the T provides resistance to bending, so T section is often used as supporting posts or strapping for walls, fences and the side planking of railway wagons.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 2, Cardiff: 6, Coventry: 4, Gloucester: 2, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2107)
Price: £9.75


More info

Plastruct 1.6x1mm Z Section (Pack of 10 ZFS-2) 90591

1.6mm (1/16in) x 1.0mm (40 thou.) Z section styrene. 1.6mm wide, with 1.0mm flat sections at each end. Styrene thickness 0.4mm (15 thou).
Pack of 10 lengths each 250mm (10in) long.

Z section has two faces at right angles to the main section width, each pointing in the opposing direction. A less commonly used section it is however ideal for some purposes like floor and wall supports, as holes for fasteners can be drilled through both flanges of the Z without the opposite flange getting in the way. This feature can also be useful for getting in with the adhesive during model building.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 5, Cardiff: 3, Coventry: 4, Gloucester: 1, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2113)
Price: £8.80


More info

Plastruct 2.4x1.4mm Z Section Pack of 9 ZFS-3 90592

2.4mm (3/32in) x 1.4mm (55 thou.) Z section styrene. 2.4mm wide, with 1.4mm flat sections at each end. Styrene thickness 0.5mm (20 thou).
Pack of 9 lengths each 250mm (10in) long.

Z section has two faces at right angles to the main section width, each pointing in the opposing direction. A less commonly used section it is however ideal for some purposes like floor and wall supports, as holes for fasteners can be drilled through both flanges of the Z without the opposite flange getting in the way. This feature can also be useful for getting in with the adhesive during model building.


Read more...
Stock:
Website: 6
Available from shops: Bristol: 7, Cardiff: 2, Coventry: 1, Gloucester: 2, Plymouth: 2, Stroud: 4(explain)
(Prod Ref #2114)
Price: £9.70


More info

Plastruct 3.2x2.0mm Z Section Pack of 8 ZFS-4 90593

3.2mm (1/8in) x 2.0mm (80 thou.) Z section styrene. 3.2mm wide, with 2.0mm flat sections at each end. Styrene thickness 0.8mm (30 thou).
Pack of 8 lengths each 375mm (15in) long.

Z section has two faces at right angles to the main section width, each pointing in the opposing direction. A less commonly used section it is however ideal for some purposes like floor and wall supports, as holes for fasteners can be drilled through both flanges of the Z without the opposite flange getting in the way. This feature can also be useful for getting in with the adhesive during model building.


Read more...
Stock:
Website: 7
Available from shops: Bristol: 5, Cardiff: 4, Coventry: 1, Gloucester: 3, Plymouth: 1, Stroud: 3(explain)
(Prod Ref #2115)
Price: £10.60


More info

Plastruct 4.8x2.7mm Z Section Pack of 5 ZFS-6 90594

4.8mm (3/16in) x 2.7mm (100 thou./0.01in) Z section styrene. 4.8mm wide, with 2.7mm flat sections at each end. Styrene thickness 0.8mm (30 thou).
Pack of 5 lengths each 375mm (15in) long.

Z section has two faces at right angles to the main section width, each pointing in the opposing direction. A less commonly used section it is however ideal for some purposes like floor and wall supports, as holes for fasteners can be drilled through both flanges of the Z without the opposite flange getting in the way. This feature can also be useful for getting in with the adhesive during model building.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 2, Gloucester: 2, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2116)
Price: £7.50


More info

Plastruct 6.4x3.7mm Z Section Pack of 5 ZFS-8 90595

6.4mm (1/2in) x 3.7mm (140 thou.) Z section styrene. 6.4mm wide, with 3.7mm flat sections at each end. Styrene thickness 1.0mm (40 thou).
Pack of 5 lengths each 600mm (24in) long.

Z section has two faces at right angles to the main section width, each pointing in the opposing direction. A less commonly used section it is however ideal for some purposes like floor and wall supports, as holes for fasteners can be drilled through both flanges of the Z without the opposite flange getting in the way. This feature can also be useful for getting in with the adhesive during model building.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 7
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 2, Gloucester: 2, Plymouth: 1, Stroud: 1(explain)
(Prod Ref #2117)
Price: £9.75


More info

Plastruct 1.6mm C Channel Section Pack of 10 CFS-2 90531

C section channel 1.6mm (1/16in) high, 0.9mm (35thou) width, styrene thickness  0.4mm (15thou).
Pack of 10 lengths, each 250mm (10in) long.

C section channel is often used for the main load-bearing beams in the construction of underframes for rail vehicles and road lorries, the deeper back section provides good resistance to bending under load while the narrower flanges prevent lateral distortion. For model building the flat-backed C section can be used to recreate the outer appearance of H and I section beams where the back is not going to be visible.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 3, Cardiff: 3, Coventry: 4, Gloucester: 3, Plymouth: 2, Stroud: 1(explain)
(Prod Ref #2050)
Price: £8.15


More info

Plastruct 2.4mm C Channel Section Pack of 10 CFS-3 90532

C section channel 2.4mm (0.1in) high, 1.0mm (40thou) width, styrene thickness  0.5mm (20thou).
Pack of 10 lengths, each 250mm (10in) long.

C section channel is often used for the main load-bearing beams in the construction of underframes for rail vehicles and road lorries, the deeper back section provides good resistance to bending under load while the narrower flanges prevent lateral distortion. For model building the flat-backed C section can be used to recreate the outer appearance of H and I section beams where the back is not going to be visible.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 3, Cardiff: 2, Coventry: 6, Gloucester: 3, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2051)
Price: £8.80


More info

Plastruct 3.2mm C Channel Section Pack of 8 CFS-4 90533

C section channel 3.2mm (1/8in) high, 1.3mm (50thou) width, styrene thickness  0.6mm (25thou).
Pack of 8 lengths, each 380mm (15in) long.

C section channel is often used for the main load-bearing beams in the construction of underframes for rail vehicles and road lorries, the deeper back section provides good resistance to bending under load while the narrower flanges prevent lateral distortion. For model building the flat-backed C section can be used to recreate the outer appearance of H and I section beams where the back is not going to be visible.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 3, Cardiff: 2, Coventry: 3, Gloucester: 2, Plymouth: 3(explain)
(Prod Ref #2052)
Price: £9.10


More info

Plastruct 4.0mm C Channel Section Pack of 6 CFS-5 90534

C section channel 4.0mm (0.16in) high, 1.4mm (55thou.) width, styrene thickness 0.8mm (30thou).
Pack of 6 lengths, each 380mm (15in) long.

C section channel is often used for the main load-bearing beams in the construction of underframes for rail vehicles and road lorries, the deeper back section provides good resistance to bending under load while the narrower flanges prevent lateral distortion. For model building the flat-backed C section can be used to recreate the outer appearance of H and I section beams where the back is not going to be visible.


Read more...
Stock:
Available from shops: Bristol: 2, Cardiff: 5, Gloucester: 3, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2053)
Price: £8.70


More info

Plastruct 4.8mm C Channel Section Pack of 5 CFS-6 90535

C section channel 4.8mm (3/16in) high, 1.6mm (1/16in) width, styrene thickness 0.9mm (35thou)
Pack of 5 lengths, each 380mm (15in) long.

C section channel is often used for the main load-bearing beams in the construction of underframes for rail vehicles and road lorries, the deeper back section provides good resistance to bending under load while the narrower flanges prevent lateral distortion. For model building the flat-backed C section can be used to recreate the outer appearance of H and I section beams where the back is not going to be visible.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 3, Coventry: 3, Gloucester: 2, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2054)
Price: £8.15


More info

Plastruct 6.4mm C Channel Section Pack of 5 CFS-8 90536

C section channel 6.4mm (1/4in) high, 2.0mm (80thou) width, styrene thickness 0.9mm (35thou)
Pack of 5 lengths, each 610mm (24in) long.

C section channel is often used for the main load-bearing beams in the construction of underframes for rail vehicles and road lorries, the deeper back section provides good resistance to bending under load while the narrower flanges prevent lateral distortion. For model building the flat-backed C section can be used to recreate the outer appearance of H and I section beams where the back is not going to be visible.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 3, Gloucester: 1, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2055)
Price: £9.80


More info

Plastruct 7.9mm C Channel Section Pack of 4 CFS-10 90537

C section channel 7.9mm (5/16in) high, 2.4mm (0.1in) width, styrene thickness 1.1mm (45thou).
Pack of 4 lengths, each 610mm (24in) long.

C section channel is often used for the main load-bearing beams in the construction of underframes for rail vehicles and road lorries, the deeper back section provides good resistance to bending under load while the narrower flanges prevent lateral distortion. For model building the flat-backed C section can be used to recreate the outer appearance of H and I section beams where the back is not going to be visible.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 3, Coventry: 2, Gloucester: 3, Plymouth: 2, Stroud: 3(explain)
(Prod Ref #2056)
Price: £9.60


More info

Plastruct 1.6mm U Channel Section Pack of 10 UFS-2 90581

1.6mm (1/16in) width deep U shape channel section. 1.6mm (1/16in) width with 1.1mm high sides. Styrene thickness 0.4mm (15 thou).

Pack of 10 lengths each 250mm (10in) long.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 4, Cardiff: 3, Coventry: 9, Gloucester: 2, Plymouth: 3, Stroud: 1(explain)
(Prod Ref #2108)
Price: £8.15


More info

Plastruct 2.4mm U Channel Section Pack of 10 UFS-3 90582

2.4mm (3/32in) width deep U shape channel section. 2.4mm (3/32in) width with 1.7mm high sides. Styrene thickness 0.6mm (25 thou).

Pack of 10 lengths each 250mm (10in) long.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 5, Cardiff: 2, Coventry: 1, Gloucester: 3, Stroud: 3(explain)
(Prod Ref #2109)
Price: £8.80


More info

Plastruct 3.2mm U Channel Section Pack of 8 UFS-4 90583

3.2mm (1/8in) width deep U shape channel section. 3.2mm (1/8in) width with 2.3mm high sides. Styrene thickness 0.8mm (30 thou).
Pack of 8 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 7, Cardiff: 2, Coventry: 2, Gloucester: 1, Plymouth: 3, Stroud: 4(explain)
(Prod Ref #2110)
Price: £9.10


More info

Plastruct 4.8mm U Channel Section Pack of 5 UFS-6 90584

4.8mm (3/16in) width deep U shape channel section. 4.8mm (3/16in) width, with 3.4mm high sides. Styrene thickness 0.8mm (30 thou).

Pack of 5 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 1
Available from shops: Bristol: 4, Cardiff: 3, Coventry: 3, Gloucester: 3, Plymouth: 1, Stroud: 1(explain)
(Prod Ref #2111)
Price: £7.50


More info

Plastruct 6.4mm U Channel Section Pack of 5 UFS-8 90585

6.4mm (1/4in) width deep U shape channel section. 6.4mm (1/4in) width with 4.6mm high sides. Styrene thickness 1.0mm (40 thou).

Pack of 5 lengths each 600mm (24in) long.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Available from shops: Bristol: 3, Cardiff: 2, Coventry: 4, Gloucester: 2, Plymouth: 3, Stroud: 2(explain)
(Prod Ref #2112)
Price: £9.75


More info

Plastruct 1.6mm H Section Column Pack of 10 HFS-2 90541

1.6mm H section. 1.6mm (60thou) height & width, 0.5mm (20thou) styrene thickness.
Pack of 10 lengths, each 254mm (10in) long.

H section is used for the support columns in most modern steel-frame buildings. In both real and model applications this section offers a good strength and resistance to bending under vertical axial loads. Both the flange and web sections contribute to support for the load, while preventing the other from distorting. In models H section can also be used as a stiffener for flat surfaces and provide extra strength and rigidity at load-bearing locations on a model.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 3, Cardiff: 6, Coventry: 4, Gloucester: 3, Plymouth: 2, Stroud: 3(explain)
(Prod Ref #2094)
Price: £8.15


More info

Plastruct 2.4mm H Section Column Pack of 10 HFS-3 90542

2.4mm H section. 2.4mm (0.1in) height & width, 0.6mm (25thou) syrene thickness.
Pack of 10 lengths, each 380mm (15in) long.

H section is used for the support columns in most modern steel-frame buildings. In both real and model applications this section offers a good strength and resistance to bending under vertical axial loads. Both the flange and web sections contribute to support for the load, while preventing the other from distorting. In models H section can also be used as a stiffener for flat surfaces and provide extra strength and rigidity at load-bearing locations on a model.


Read more...
Stock:
Available from shops: Bristol: 3, Cardiff: 3, Gloucester: 3, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2095)
Price: £10.10


More info

Plastruct 3.2mm H Section Column Pack of 8 HFS-4 90543

3.2mm H section. 3.2mm (1/8in) height & width, 0.9mm (35thou) styrene thickness.
Pack of 8 lengths, each 380mm (15in) long.

H section is used for the support columns in most modern steel-frame buildings. In both real and model applications this section offers a good strength and resistance to bending under vertical axial loads. Both the flange and web sections contribute to support for the load, while preventing the other from distorting. In models H section can also be used as a stiffener for flat surfaces and provide extra strength and rigidity at load-bearing locations on a model.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 2, Cardiff: 2, Gloucester: 2, Plymouth: 1, Stroud: 1(explain)
(Prod Ref #2096)
Price: £9.05


More info

Plastruct 4.0mm H Section Column Pack of 6 HFS-5 90544

4mm H section. 4mm (5/32in) height & width, 1.0mm (40thou.) styrene thickness..
Pack of 6 lengths, each 380mm (15in) long.

H section is used for the support columns in most modern steel-frame buildings. In both real and model applications this section offers a good strength and resistance to bending under vertical axial loads. Both the flange and web sections contribute to support for the load, while preventing the other from distorting. In models H section can also be used as a stiffener for flat surfaces and provide extra strength and rigidity at load-bearing locations on a model.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 2, Coventry: 3, Gloucester: 2, Stroud: 2(explain)
(Prod Ref #2097)
Price: £8.70


More info

Plastruct 4.8mm H Section Column Pack of 5 HFS-6 90545

4.8mm H section. 4.8mm (3/16in) height & width, 1.4mm (55thou) styrene thickness.
Pack of 5 lengths, each 610mm (24in) long.

H section is used for the support columns in most modern steel-frame buildings. In both real and model applications this section offers a good strength and resistance to bending under vertical axial loads. Both the flange and web sections contribute to support for the load, while preventing the other from distorting. In models H section can also be used as a stiffener for flat surfaces and provide extra strength and rigidity at load-bearing locations on a model.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 1, Gloucester: 3, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2098)
Price: £9.45


More info

Plastruct 6.4mm H Section Column Pack of 5 HFS-8 90546

6.4mm H section. 6.4mm (1/4in) height & width, 1.5mm (60thou) styrene thickness.
Pack of 5 lengths, each 380mm (15in) long.

H section is used for the support columns in most modern steel-frame buildings. In both real and model applications this section offers a good strength and resistance to bending under vertical axial loads. Both the flange and web sections contribute to support for the load, while preventing the other from distorting. In models H section can also be used as a stiffener for flat surfaces and provide extra strength and rigidity at load-bearing locations on a model.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 4, Gloucester: 2, Plymouth: 2, Stroud: 1(explain)
(Prod Ref #2099)
Price: £7.20


More info

Plastruct 7.9mm H Section Column Pack of 5 HFS-10 90547

7.9mm H section. 7.9mm (5/16in) height & width, 1.7mm (65thou) styrene thickness.
Pack of 5 lengths, each 380mm (15in) long.

H section is used for the support columns in most modern steel-frame buildings. In both real and model applications this section offers a good strength and resistance to bending under vertical axial loads. Both the flange and web sections contribute to support for the load, while preventing the other from distorting. In models H section can also be used as a stiffener for flat surfaces and provide extra strength and rigidity at load-bearing locations on a model.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 2, Cardiff: 2, Gloucester: 2, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2100)
Price: £8.80


More info

Plastruct 9.5mm H Section Column Pack of 4 HFS-12 90548

9.5mm H section. 9.5mm (3/8in) height & width, 1.8mm (70thou) styrene thickness.
Pack of 4 lengths, each 380mm (15in) long.

H section is used for the support columns in most modern steel-frame buildings. In both real and model applications this section offers a good strength and resistance to bending under vertical axial loads. Both the flange and web sections contribute to support for the load, while preventing the other from distorting. In models H section can also be used as a stiffener for flat surfaces and provide extra strength and rigidity at load-bearing locations on a model.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 6, Cardiff: 3, Coventry: 4, Gloucester: 3, Plymouth: 2, Stroud: 1(explain)
(Prod Ref #2101)
Price: £8.30


More info

Plastruct 1.6mm I Section Beam Pack of 10 BFS-2 90511

1.6mm I section beam. 1.6mm (1/16in) high, 0.8mm (1/32in) width, styrene 0.4mm (15thou) thick.
Pack of 10 lengths, each 250mm (10in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 4, Cardiff: 2, Coventry: 4, Gloucester: 3, Plymouth: 1, Stroud: 3(explain)
(Prod Ref #2038)
Price: £8.15


More info

Plastruct 2.4mm I Section Beam Pack of 10 BFS-3 90512

2.4mm I section beam. 2.4mm (0.1in) high, 1.2mm (50thou) width, styrene 0.5mm (20thou) thick.
Pack of 10 lengths, each 250mm (10in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 3, Gloucester: 2, Plymouth: 3, Stroud: 2(explain)
(Prod Ref #2039)
Price: £8.80


More info

Plastruct 3.2mm I Section Beam Pack of 8 BFS-4 90513

3.2mm I section beam. 3.2mm (1/8in) high, 1.6mm (1/16in) width, styrene 0.6mm (25thou) thick.
Pack of 8 lengths, each 380mm (15in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Website: 1
Available from shops: Bristol: 5, Cardiff: 3, Coventry: 6, Gloucester: 3, Plymouth: 2, Stroud: 4(explain)
(Prod Ref #38358)
Price: £9.05


More info

Plastruct 4.0mm I Section Beam Pack of 6 BFS-5 90514

4.0mm I section beam. 4.0mm (0.16in) high, 2.0mm (80thou) width, styrene 0.8mm (30thou) thick.
Pack of? 6 lengths, each 380mm (15in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 5, Cardiff: 2, Gloucester: 3, Plymouth: 2, Stroud: 3(explain)
(Prod Ref #2041)
Price: £8.70


More info

Plastruct 4.8mm I Section Beam Pack of 5 BFS-6 90515

4.8mm I section beam. 4.8mm (0.2in) high, 2.4mm (0.1in) width, styrene 0.9mm (35thou) thick.
Pack of 5 lengths, each 610mm (24in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 3, Cardiff: 2, Coventry: 4, Gloucester: 1, Plymouth: 3, Stroud: 4(explain)
(Prod Ref #2042)
Price: £8.80


More info

Plastruct 6.4mm I Section Beam Pack of 5 BFS-8 90516

6.4mm I section beam. 6.4mm (1/4in) high, 3.2mm (1/8in) width, styrene 0.9mm (35thou) thick.
Pack of 5 lengths, each 610mm (24in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 4, Coventry: 1, Gloucester: 3, Plymouth: 2, Stroud: 1(explain)
(Prod Ref #2043)
Price: £9.80


More info

Plastruct 7.9mm I Section Beam Pack of 4 BFS-10 90517

7.90mm I section beam. 7.9mm (5/16in) high, 4.0mm (0.16in) width, styrene 1.1mm (45thou) thick.
Pack of 4 lengths, each 610mm (24in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.

The length of this item may cause packages to exceed the Royal Mail maximum length limit requiring shipment by courier service. Where we are able to send your parcel by Royal Mail we will reduce the postage rate when processing the order.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 2, Cardiff: 2, Gloucester: 3, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2045)
Price: £9.60


More info

Plastruct 9.5mm I Section Beam Pack of 5 BFS-12 90518

9.5mm I section beam. 9.5mm (3/8in) high, 4.8mm (0.2in) width, styrene 1.1mm (45thou) thick.
Pack of 5 lengths, each 380mm (15in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 2, Gloucester: 2, Plymouth: 3, Stroud: 2(explain)
(Prod Ref #2046)
Price: £7.50


More info

Plastruct 11.1mm I Section Beam Pack of 5 BFS-14 90519

11.1mm I section beam. 11.1mm (7/16in) high, 5.6mm (0.22in) width, styrene 1.4mm (55thou) thick.
Pack of 5 lengths, each 380mm (15in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 2, Gloucester: 3, Plymouth: 4, Stroud: 2(explain)
(Prod Ref #2047)
Price: £8.80


More info

Plastruct 12.7mm I Section Beam Pack of 4 BFS-16 90520

12.7mm I section beam. 12.7mm (1/2in) high, 6.4mm (1/4in) width, styrene 1.5mm (60thou) thick.
Pack of 4 lengths, each 380mm (15in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 4, Cardiff: 2, Gloucester: 2, Stroud: 2(explain)
(Prod Ref #2044)
Price: £8.30


More info

Plastruct 14.3mm I Section Beam Pack of 3 BFS-18 90521

14.3mm I section beam. 14.3mm (9/16in) high, 7.1mm (9/32in) width, styrene 1.5mm (60thou) thick.
Pack of 3 lengths, each 380mm (15in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 7, Cardiff: 3, Coventry: 2, Gloucester: 2, Stroud: 2(explain)
(Prod Ref #2048)
Price: £7.15


More info

Plastruct 15.9mm I Section Beam Pack of 3 BFS-20 90522

15.9mm I section beam. 15.9mm (5/8in) high, 7.9mm (5/16in) width, styrene 1.5mm (60thou) thick.
Pack of 3 lengths, each 380mm (15in) long.

Mounted with the deep web of the I section vertical as a beam this section provides a very good load bearing capability, while the flanges top and bottom prevent lateral bending. Often described by the term 'rolled steel joist' or 'RSJ' I beams are commonly used for all horizontal load bearing structures such as window lintels, floor joists, roof supports, hoist runners and bridges. Deeper section beams provide for greater load carrying capacity and/or for longer bridge spans.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 1, Coventry: 2, Gloucester: 3, Stroud: 3(explain)
(Prod Ref #2049)
Price: £7.50


More info

Plastruct 3.2mm Open Lattice Truss Girder Pack of 2 OWTS-4 90651

3.2mm depth open lattice web truss girder section. Truss depth 3.2mm (1/8in) flange thickness 1.6mm (1/16in), lattice diagonal spacing 4.8mm (3/16in).
Pack of 2 lengths, each 150mm (6in) long.

Lattice trusses offer a small reduction in load capacity at much lower weight than similar sized solid girders. Lattice girders are often used for lightly loaded structures, like large span roofs of factorys and supermarkets, or where wind resistance may be an issue such as very tall lighting poles.
The ready to use Plastruct lattice makes it easy to model open lattice structures and fit model light-duty structures like footbridges, pipe bridges and catwalks.


Read more...
Stock:
Website: 6
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 3, Gloucester: 1, Stroud: 3(explain)
(Prod Ref #2145)
Price: £5.65


More info

Plastruct 4.8mm Open Lattice Truss Girder Pack of 2 OWTS-6 90652

4.8mm depth open lattice web truss girder section. Truss depth 4.8mm (3/16in) flange thickness 2.4mm (3/32in), lattice diagonal spacing 6.4mm (1/4in).
Pack of 2 lengths, each 150mm (6in) long.

Lattice trusses offer a small reduction in load capacity at much lower weight than similar sized solid girders. Lattice girders are often used for lightly loaded structures, like large span roofs of factorys and supermarkets, or where wind resistance may be an issue such as very tall lighting poles.
The ready to use Plastruct lattice makes it easy to model open lattice structures and fit model light-duty structures like footbridges, pipe bridges and catwalks.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 3, Gloucester: 2, Plymouth: 2, Stroud: 3(explain)
(Prod Ref #2146)
Price: £6.80


More info

Plastruct 6.4mm Lattice Truss Girder Pack of 2 OWTS-8 90653

6.4mm depth open lattice web truss girder section. Truss depth 6.4mm (1/4in) flange thickness 3.2mm (1/8in), lattice diagonal spacing 9.5mm (3/8in).
Pack of 2 lengths, each 150mm (6in) long.

Lattice trusses offer a small reduction in load capacity at much lower weight than similar sized solid girders. Lattice girders are often used for lightly loaded structures, like large span roofs of factorys and supermarkets, or where wind resistance may be an issue such as very tall lighting poles.
The ready to use Plastruct lattice makes it easy to model open lattice structures and fit model light-duty structures like footbridges, pipe bridges and catwalks.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 2, Gloucester: 3, Plymouth: 1, Stroud: 4(explain)
(Prod Ref #2147)
Price: £7.50


More info

Plastruct 9.5mm Open Lattice Truss Girder Pack of 2 OWTS-12 90654

9.5mm depth open lattice web truss girder section. Truss depth 9.5mm (3/8in) flange thickness 4.4mm (11/64in), lattice diagonal spacing 15.9mm (5/8in).
Pack of 2 lengths, each 150mm (6in) long.

Lattice trusses offer a small reduction in load capacity at much lower weight than similar sized solid girders. Lattice girders are often used for lightly loaded structures, like large span roofs of factorys and supermarkets, or where wind resistance may be an issue such as very tall lighting poles.
The ready to use Plastruct lattice makes it easy to model open lattice structures and fit model light-duty structures like footbridges, pipe bridges and catwalks.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 3, Cardiff: 1, Coventry: 1, Gloucester: 2, Plymouth: 3, Stroud: 2(explain)
(Prod Ref #2148)
Price: £8.55


More info

Plastruct 12.7mm Open Lattice Truss Girder Pack of 2 OWTS-16 90655

12.7mm depth open lattice web truss girder section. Truss depth 12.7mm (1/2in) flange thickness 4.8mm (3/16in), lattice diagonal spacing 21.4mm (27/32in).
Pack of 2 lengths, each 300mm (12in) long.

Lattice trusses offer a small reduction in load capacity at much lower weight than similar sized solid girders. Lattice girders are often used for lightly loaded structures, like large span roofs of factorys and supermarkets, or where wind resistance may be an issue such as very tall lighting poles.
The ready to use Plastruct lattice makes it easy to model open lattice structures and fit model light-duty structures like footbridges, pipe bridges and catwalks.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 2, Coventry: 3, Gloucester: 2, Plymouth: 1, Stroud: 3(explain)
(Prod Ref #2149)
Price: £9.70


More info

Plastruct 15.9mm Open Lattice Truss Girder Pack of 2 OWTS-20 90656

15.9mm depth open lattice web truss girder section. Truss depth 15.9mm (5/8in) flange thickness 6.4mm (1/4in), lattice diagonal spacing 27.8mm (1 3/32in).
Pack of 2 lengths, each 300mm (12in) long.

Lattice girders offer a small reduction in load capacity at much lower weight when compared to similar sized solid girders. Lattice girders are often used for lightly loaded structures, like large span roofs of factorys and supermarkets, or where wind resistance may be an issue such as very tall lighting poles.
The ready to use Plastruct lattice makes it easy to model open lattice structures and fit model light-duty structures like footbridges, pipe bridges and catwalks.


Read more...
Stock:
Available from shops: Bristol: 3, Cardiff: 3, Coventry: 2, Gloucester: 6, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2150)
Price: £10.85


More info

Plastruct 19mm Open Lattice Truss Girder Pack of 2 OWTS-24 90657

19mm open lattice web truss girder section. Truss depth 19.1mm (3/4in) flange thickness 6.4mm (1/4in), lattice diagonal spacing 33.7mm (1 21/64in).
Pack of 2 lengths, each 300mm (12in) long.

Lattice trusses offer a small reduction in load capacity at much lower weight than similar sized solid girders. Lattice girders are often used for lightly loaded structures, like large span roofs of factorys and supermarkets, or where wind resistance may be an issue such as very tall lighting poles.
The ready to use Plastruct lattice makes it easy to model open lattice structures and fit model light-duty structures like footbridges, pipe bridges and catwalks.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 5, Cardiff: 2, Coventry: 3, Plymouth: 3, Stroud: 1(explain)
(Prod Ref #2151)
Price: £12.45


More info

Plastruct 25.4mm Open Lattice Truss Girder Pack of 2 OWTS-32 90658

25.4mm open lattice web truss girder section. Truss depth 25.4mm (1in) flange thickness 7.9mm (5/16in), lattice diagonal spacing 46.8mm (1 27/32in).
Pack of 2 lengths, each 300mm (12in) long.

Lattice trusses offer a small reduction in load capacity at much lower weight than similar sized solid girders. Lattice girders are often used for lightly loaded structures, like large span roofs of factorys and supermarkets, or where wind resistance may be an issue such as very tall lighting poles.
The ready to use Plastruct lattice makes it easy to model open lattice structures and fit model light-duty structures like footbridges, pipe bridges and catwalks.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 4, Cardiff: 3, Coventry: 4, Gloucester: 7, Plymouth: 3, Stroud: 3(explain)
(Prod Ref #2152)
Price: £14.00


More info

Plastruct 2.4mm OD Tube Pack of 15 TBFS-3 90603

2.4mm (3/32in) outside diameter styrene tube. Internal diameter 1.4mm (55 thou.), wall thickness 0.5mm (20 thou.) Pack of 15 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 3, Cardiff: 4, Coventry: 2, Gloucester: 5, Stroud: 2(explain)
(Prod Ref #2120)
Price: £11.40


More info

Plastruct 3.2mm OD Tube Pack of 10 TBFS-4 90604

3.2mm (1/8in) outside diameter styrene tube. Internal diameter 1.9mm (76 thou.), wall thickness 0.6mm (25 thou.) Pack of 9 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 2, Cardiff: 5, Gloucester: 4, Stroud: 1(explain)
(Prod Ref #2121)
Price: £8.15


More info

Plastruct 4.8mm OD Tube Pack of 8 TBFS-6 90605

4.8mm (3/16in) outside diameter styrene tube. Internal diameter 3.4mm (133 thou.), wall thickness 0.7mm (27 thou.) Pack of 8 lengths each 375mm (15in) long.


Read more...
Stock:
Available from shops: Bristol: 3, Cardiff: 1, Gloucester: 4, Plymouth: 3, Stroud: 1(explain)
(Prod Ref #2122)
Price: £6.95


More info

Plastruct 6.4mm OD Tube Pack of 7 TBFS-8 90606

6.4mm ( in) outside diameter styrene tube. Internal diameter 4.9mm (193 thou.), wall thickness 0.7mm (27 thou.) Pack of 7 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 7, Cardiff: 4, Coventry: 8, Gloucester: 4, Plymouth: 1, Stroud: 1(explain)
(Prod Ref #2123)
Price: £7.90


More info

Plastruct 7.9mm OD Tube Pack of 6 TBFS-10 90607

7.9mm (5/16in) outside diameter styrene tube. Internal diameter 6.4mm ( in), wall thickness 0.8mm (1/32in) Pack of 6 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 4, Cardiff: 2, Coventry: 6, Gloucester: 1, Plymouth: 3, Stroud: 2(explain)
(Prod Ref #2124)
Price: £8.65


More info

Plastruct 9.5mm OD Tube Pack of 5 TBFS-12 90608

9.5mm (3/8in) outside diameter styrene tube. Internal diameter 8.3mm (21/64in), wall thickness 0.8mm (1/32in) Pack of 5 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 4, Cardiff: 3, Coventry: 6, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2125)
Price: £7.80


More info

Plastruct 3.2mm Square Tube Pack of 7 STFS-4 90621

3.2mm (1/8in) square section tube. Internal size 2.2mm, wall thickness 0.5mm. Pack of 7 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 4
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 2, Gloucester: 3, Plymouth: 2, Stroud: 4(explain)
(Prod Ref #2129)
Price: £7.90


More info

Plastruct 4.8mm Square Tube Pack of 6 STFS-6 90622

4.8mm (3/16in) square section tube. Internal size 3.6mm, wall thickness 0.6mm.
Pack of 6 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 2, Cardiff: 2, Gloucester: 6, Plymouth: 2, Stroud: 1(explain)
(Prod Ref #2130)
Price: £7.90


More info

Plastruct 6.4mm Square Tube Pack of 5 STFS-8 90623

6.4mm ( in) square section tube. Internal size 5.2mm, wall thickness 0.6mm. Pack of 5 lengths each 375mm (15in) long.


Read more...
Stock:
Available from shops: Bristol: 2, Cardiff: 1, Coventry: 1, Gloucester: 3, Plymouth: 1, Stroud: 2(explain)
(Prod Ref #2131)
Price: £7.15


More info

Plastruct 7.9mm Square Tube Pack of 5 STFS-10 90624

7.9mm (5/16in) square section tube. Internal size 6.7mm, wall thickness 0.6mm. Pack of 5 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 1, Gloucester: 3, Stroud: 1(explain)
(Prod Ref #2132)
Price: £8.15


More info

Plastruct 9.5mm Square Tube Pack of 4 STFS-12 90625

9.5mm (3/8in) square section tube. Internal size 8.3mm, wall thickness 0.6mm. Pack of 4 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 2, Gloucester: 2, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2133)
Price: £7.50


More info

Plastruct 6.4mm x 4.8mm Rectangular Tube Pack of 5 RTFS-8 90631

6.4mm x 4.8mm ( in x 3/16in) rectangular tube section. Internal size approx 5.2mm x 3.6mm, wall thickness 0.6mm. Pack of 5 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 1, Gloucester: 3, Plymouth: 3, Stroud: 2(explain)
(Prod Ref #2134)
Price: £7.15


More info

Plastruct 7.9mm x 6.4mm Rectangular Tube Pack of 5 RTFS-10 90632

7.9mm x 6.4mm (5/16in x in) rectangular tube section. Internal size approx 6.7mm x 5.2mm, wall thickness 0.6mm. Pack of 5 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 3, Cardiff: 3, Coventry: 3, Gloucester: 2, Plymouth: 3, Stroud: 1(explain)
(Prod Ref #2135)
Price: £8.15


More info

Plastruct 9.5mm x 6.4mm Rectangular Tube Pack of 4 RTFS-12 90633

9.5mm x 6.4mm (3/8in x in) rectangular tube section. Internal size approx 8.3mm x 5.2mm, wall thickness 0.6mm. Pack of 5 lengths each 375mm (15in) long.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 3, Cardiff: 1, Coventry: 2, Gloucester: 2, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2136)
Price: £7.50


More info

Plastruct 1/200 / N 2mm Scale Handrail Pack of 2 HRS-2 90681

Two lengths of 2mm scale three-rail handrail section, each 90mm (3.5in) long.

Overal height 6.7mm (17/64in). Stanchion spacing 11.1mm (7/16in)


Read more...
Stock:
Website: 5
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 3, Gloucester: 2, Plymouth: 3, Stroud: 2(explain)
(Prod Ref #2141)
Price: £3.83


More info

Plastruct 1/200 / N 2mm Scale Stairs Pack of 2 STAS-2 90661

Open staircase units moulded in styrene plastic for 2mm scale modelling, eg N gauge railways.

Supplied in a pack of 2 sections, width 5.6mm length 75mm/3in.
Read more...
Stock:
Website: 4
Available from shops: Bristol: 5, Cardiff: 3, Coventry: 5, Gloucester: 5, Stroud: 2(explain)
(Prod Ref #2137)
Price: £3.45


More info

Plastruct 1/200 / N 2mm Stair Rails Pack of 2 SRS-2 90691

Designed to match with the N scale stairs, STAS-2 (90661)

Supplied in a pack of 2 pieces, each 6.4mm height, 90mm length.
Read more...
Stock:
Website: 5
Available from shops: Bristol: 5, Cardiff: 3, Coventry: 4, Gloucester: 2, Stroud: 1(explain)
(Prod Ref #2143)
Price: £3.35


More info

Plastruct 1/200 2mm Scale Ladders Pack of 2 LS-2 90671

Ladder section scaled at 1/200, suitable for N gauge model railways.

Pack of 2. Length 75mm / 3in


Read more...
Stock:
Website: 6
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 8, Gloucester: 3, Plymouth: 2, Stroud: 3(explain)
(Prod Ref #2139)
Price: £3.35


More info

Plastruct 1/100 / OO/HO 4mm Scale Handrail Pack of 2 HRS-4 90682

2 pieces each 11mm height, length 150mm/6in.
Stanchion spacing 19mm.
Read more...
Stock:
Available from shops: Bristol: 3, Cardiff: 3, Coventry: 4, Gloucester: 3, Plymouth: 5(explain)
(Prod Ref #2142)
Price: £4.80


More info

Plastruct 1/100 / OO/HO 4mm Scale Stairs Pack of 2 STAS-4 90662

Open staircase units moulded in styrene plastic for 3.5 or 4mm scale modelling, eg OO/HO gauge railways.

Supplied in a pack of 2 sections, width 9.9mm length 125mm/5in.

Read more...
Stock:
Website: 1
Available from shops: Bristol: 8, Cardiff: 2, Gloucester: 3, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2138)
Price: £4.35


More info

Plastruct 1/100 / OO/HO 4mm Stair Rails Pack of 2 SRS-4 90692

Designed to match with the 1/100 / OO/HO scale stairs, STAS-4 (90662)

Supplied in a pack of 2 pieces, each 10.7mm height, 125mm length.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 1, Cardiff: 3, Gloucester: 2, Plymouth: 2, Stroud: 2(explain)
(Prod Ref #2144)
Price: £3.85


More info

Plastruct 1/100 / OO/HO 4mm Scale Ladders Pack of 2 LS-4 90672

Ladder section at 1/100 scale, suitable for OO and HO model railways.

Pack of 2, length 125mm / 5in.


Read more...
Stock:
Website: 3
Available from shops: Bristol: 3, Cardiff: 1, Coventry: 1, Gloucester: 6, Stroud: 4(explain)
(Prod Ref #2140)
Price: £3.85


More info

Plastruct 1/48 Styrene Hand Rails HRS-8 90683

Moulded white styrene handrail section designed for 1/48 scale modelling. Overall height 22mm (0.85in). 1 length 605mm (23.8in) long.
Handrail panel measurements:
Vertical/Across Width, 2mm bottom rail, 9mm opening, 1mm centre rail, 9mm opening, 1mm top rail.
Horizontal/Along Length 1mm rail, 37mm opening, repeated.


Read more...
Stock:
Pre-Order (Website:0)(explain)
(Prod Ref #40424)
Price: £7.45


More info

Plastruct 1/48 Styrene Stairway 3ft Width STAS-8 90664

Open staircase unit moulded in styrene plastic for 1/48 of ?in scale modelling, eg O gauge railways.

Single piece width 22mm length 300mm/12in.

Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision Injection Molded in White Styrene Plastic.


Read more...
Stock:
Website: 1
Available from shops: Cardiff: 2, Coventry: 1, Plymouth: 2(explain)
(Prod Ref #44849)
Price: £8.45


More info

Plastruct 1/48 Styrene Stair Rail SRS-8 90693

Use for hand rails on stairways. Precision Injection Molded in White Styrene Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.

Designed to match with the 1/48 / O scale stairs, STAS-8 (90663)

Supplied singly, 22mm height, 600mm length.

Read more...
Stock:
Website: 1
Available from shops: Coventry: 1(explain)
(Prod Ref #39311)
Price: £7.45


More info

Plastruct 1/48 Styrene Ladders Pack of 2 LS-8 90673

Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in White Styrene Plastic.

Ideal for museum quality and smaller scale model construction where assembly speed, profile accuracy and cost are the determining factors.

Length 375mm / 15in.


Read more...
Stock:
Website: 2(explain)
(Prod Ref #44820)
Price: £8.95


More info

Plastruct 1/48 Safety Cage and Ladder Set CLS-8 90973

Use on towers, tanks, buildings and other tall structures where a ladder is perpindicular (or 90 ) to the ground. Precision Injection Molded in White Styrene Plastic. Ideal for all professional model construction.

Length 300mm

Read more...
Stock:
Available from shops: Coventry: 1(explain)
(Prod Ref #44752)
Price: £11.85


More info

Plastruct 1/32 Styrene Ladders (Pack of 2 LS-12) 90674

Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in White Styrene Plastic.

Ideal for museum quality and smaller scale model construction where assembly speed, profile accuracy and cost are the determining factors.

Length 375mm / 15in.


Read more...
Stock:
Website: 1
Available from shops: Cardiff: 3(explain)
(Prod Ref #44829)
Price: £9.95


More info

Plastruct 1/24 Plastruct Stairway STAS-16 90667

Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision Injection Molded in White Styrene Plastic. Ideal for all outdoor or professional model construction where model life is critical.

Singlke piece width 36.5mm length 300mm/12in.

Read more...
Stock:
Available from shops: Cardiff: 2, Plymouth: 1(explain)
(Prod Ref #44931)
Price: £10.15


More info

Plastruct 1/32 Styrene Stair Rail SRS-12

Use for hand rails on stairways. Precision Injection Molded in White Styrene Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.

Designed to match with the 1/32 scale stairs, STAS-12

Supplied singly,  450 mm length.

Read more...
Stock:
Website: 2
Available from shops: Cardiff: 2, Plymouth: 3(explain)
(Prod Ref #39314)
Price: £8.15


More info

Plastruct 1/24 Styrene Ladders Pack of 2 LS-16 90675

Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in White Styrene Plastic.

Ideal for museum quality and smaller scale model construction where assembly speed, profile accuracy and cost are the determining factors.

Single piece width 19mm length 375mm / 15in.

Read more...
Stock:
Website: 2
Available from shops: Cardiff: 1, Plymouth: 1(explain)
(Prod Ref #44830)
Price: £11.00

stock
info

Plastruct 1/24 Styrene Safety Cage and Ladder Set CLS-16 90975

Use on towers, tanks, buildings and other tall structures where a ladder is perpindicular (or 90 ) to the ground. Precision Injection Molded in White Styrene Plastic. Ideal for all professional model construction.

1/24 scale suitable for G gauge model railways.

Length 450mm


Read more...
Stock:
Available from shops: Cardiff: 3(explain)
(Prod Ref #70595)
Price: £14.00


More info

Plastruct 1/16 Styrene Ladders (Pack of 2 LS-24) 90676

Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in White Styrene Plastic.

Single piece Width 28mm length 375mm / 15in

Read more...
Stock:
Website: 2(explain)
(Prod Ref #44846)
Price: £11.05


More info

Plastruct G Styrene Hand Rails HRS-16 90685

Use for hand rails on platforms, walkways, balconies and any other elevated structures with public access. Precision Injection Molded in White Styrene.

Ideal for museum quality and smaller scale model construction where assembly speed, profile accuracy and cost are the determining factors.

Height 1 3/4in, stantion spacing 3in, length 600mm/24in


Read more...
Stock:
Available from shops: Cardiff: 6, Plymouth: 4(explain)
(Prod Ref #44816)
Price: £9.05

stock
info

Plastruct 1/32 Styrene Hand Rail Section HRS-12 90684

1/32 scale handrail section 34mm height.

One piece, 608mm / 24in length.
Read more...
Stock:
Website: 9+(explain)
(Prod Ref #42846)
Price: £8.15

> Tools, Paints & Scenics > Materials > Plastic Sheet & Shapes > Plastruct Sections
 
Antics on-line with model shops in: Stroud (HQ), Bristol, Cardiff, Gloucester, Plymouth and Coventry.
We stock a full range which includes plastic kits, radio control cars, diecast models, railways, planes and boats etc.
Click on the links under "Available to buy now" or any picture in order to start shopping. Offers subject to availability. E&OE.
Jatech Limited