Peco N N Gauge Starter Track Set (ST-300)

Peco Setrack N gauge starter set contains an oval of track plus two points to add sidings to your first layout. Several track plans can be assembled from the track sections supplied and the layout can be further expanded with Peco Setrack sectional track or Streamline flexible track.

Set contains the following track sectionsents : 6xST1 straights, 5xST3 standard curves, 1xST5 & 1xST6 left and right points, 2xST8 siding buffer stops, 2xST9, 3xST11 double straights, 6xST12 double curves. A 1N1 Setrack Planbook is also supplied.

Peco N Setrack N Planbook (IN-1)

New edition of the Peco Setrack track plans book expected soon.

This new edition conatins 48 A4 size pages featuring 27 plans ranging from small ovals and end-to-end shelf layouts? to room-sized plans for mainlines in miniature.

Peco N On-Railer N Gauge (SL-337)

Peco N Setrack Standard Straight 87mm (ST-1)

Peco N Setrack Short Straight 58mm (ST-2)

Peco N Setrack Double Straight 174mm (ST-11)

Peco N Setrack No.1 Radius Double Curve (ST-12)

Double length no.1 radius curve section.

Radius 228mm / 9in. Angle 45 degrees. 8 required for a complete circle.
Double curves allow you to build up a circle of track quickly with a minimum of joints.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

Peco N Setrack No.1 Radius Standard Curve (ST-3)

Radius 228mm / 9in. Angle 22.5 degrees. 16 required to for a complete circle.

This curve is equivalent to the curved side of Setrack ST5/ST6 points and can be used with a point to bring the divirging track back to parallel.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

Peco N Setrack No.1 Radius Half Curve (ST-4)

Half-length no.1 radius curve section.

Radius 228mm / 9in. Angle 11.25 degrees. 32 required for a complete circle.

Peco N Setrack 2nd Radius Double Curve (ST-15)

Peco N Setrack 2nd Radius Standard Curve (ST-14)

Peco N Setrack No.3 Radius Double Curve (ST-17)

A new large radius Setrack curve, at 298.5mm/11.75in.
This is ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Double curve 45 degrees. 8 required to form a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

Peco N Setrack No.3 Radius Standard Curve (ST-16)

No.3 radius Setrack curve.

At 298.5mm/11.75in radius this is ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Standard curve 22.5 degrees. 16 required to form a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

Peco N Setrack No.4 Radius Double Curve (ST-19)

A new large radius Setrack curve. This is ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Radius 333.4mm/13.1in. Angle 45 degrees. 8 required to for a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

Peco N Setrack No.4 Radius Standard Curve (ST-18)

A new large radius Setrack curve. This is ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Radius 333.4mm/13.1in. Angle 22.5 degrees. 16 required to for a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

Peco N Setrack Right Hand Turnout (ST-5)

Right hand Setrack turnout with insulated frog.

Radius 9in (228mm), angle 22.25degrees, length 87mm (3 7/16in).

These standard Setrack points are the same length as the ST-1 straight, with the curved arm equivalent to the ST-3 curve.

Peco N Setrack Left Hand Turnout (ST-6)

Left hand Setrack turnout with insulated frog.

Radius 9in (228mm), angle 22.25 degrees, length 87mm (3 7/16in).

These standard Setrack points are the same length as the ST-1 straight, with the curved arm equivalent to the ST-3 curve.

Peco N Setrack Right-Handed Crossing (ST-50)

Right handed Peco Setrack crossing, used to create double-track junctions using the Peco Setrack system.

Use with ST-5 Right Hand points to form a crossing from a parallel track. The longer track passing through the crossing allows for the extra length needed by the diagonal track to maintain the sectional track geometry.

Peco N Setrack Left-Handed Crossing (ST-51)

Left handed Peco Setrack crossing, used to create double-track junctions using the Peco Setrack system.

Use with ST-6 Left Hand points to form a crossing from a parallel track. The longer track passing through the crossing allows for the extra length needed by the diagonal track to maintain the sectional track geometry.

Peco N Setrack Buffer Stop Sleeper Built x2 (ST-8)

Pack of two sleeper-built buffer stop units.

One piece unit moulded in brown plastic with slots to locate on code 80 Setrack or Steamline flexitrack.

Peco N Setrack Power Connecting Clips (ST-9)

Pressed metal power connecting clips designed to fit securly underneath N gauge code 80 Setrack and Streamline flexitrack. Eyelets are provided to allow easy wire connection.

Peco N Streamline Ballast Inlay R/H Setrack (SL-348)

Foam ballast inlay for ST5 right-hand points.

Pack of 2.

Peco N Streamline Ballast Inlay L/H Setrack (SL-349)

Foam ballast inlay for left-hand turnouts ST6.

Pack of 2.