Tamiya 1/32 USAF F-15J Eagle Aircraft Kit (60307)
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Website: 1 (
explain )
(Prod Ref #84272)
Tamiya 1/32 Lockheed F-16CJ Block 50 Fighting Falcon (60315)
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Website: 1 (
explain )
(Prod Ref #6697)
Tamiya 1/32 Supermarine Spitfire Mk.IXC Fighter Model Kit (60319)
1/32 scale plastic assembly kit of the RAF Spitfire Mk.IXc includes alternative parts for top and bottom engine cowlings, with built-in magnets to allow for cowl removal, revealing the highly detailed model of the Merlin engine. Alternative wingtips are supplied, along with movable ailerons and posable flags to depict these in the up or down position. The cockpit interior is highly detailed, including front and rear bulkhead structures, with many photo-etched detail parts.
Supplied with decals for three aircraft to depict the aircraft piloted by RAF ace Johnnie Johnson, an aicraft flown by the Polish Fighting Team 145 Squadron in Tunisia 1943 or GC 1/4 "Dauphine" of the French Air Force at Nha-Trang Indochina in 1948
Overall Length: 302mm, Overall Width: 352mm.
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Website: 1 (
explain )
(Prod Ref #79620)
Tamiya 1/32 Supermarine Spitfire Mk.VIII Fighter Model Kit (60320)
The model features a detailed riveted surface. The retractable tail landing gear, shortened ailerons, and fuel tank positioning which are famous features of the Mk.VIII Spitfire are accurately modeled. Parts to depict the extended wingtips of the Mk.VIII early production model are included. The wing with its two 20mm cannons and four 7.7mm machine guns is faithfully re-produced. You can choose to depict your model with the main landing gear in either stowed or deployed position. Parts with built-in magnets also allow you to depict the tail landing gear in either stowed or deployed state. Display stand to depict the Mk.VIII in flight included. The details of the Rolls Royce Merlin engine including oil tanks, and supercharger have been faithfully modeled. Engine cowlings are removable. Movable elevators, rudder, and ailerons. Flaps can be depicted in up or down position. Parts to depict 30 gallon and 90 gallon fuel drops tanks included. One seated and one standing pilot figure included. Markings to depict the Mk.VIII flown by the U.S. air force, RAAF, and Canadian air force included (Total 3.). Canopy masking stickers included.
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Website: 1 (
explain )
(Prod Ref #83510)
Tamiya 1/32 Supermarine Spitfire Mk.XVIe Fighter Model Kit (60321)
This is the first 1/32 scale Spitfire Mk.XVIe full injection kimodel. The engine cowlings have an amazing 0.4mm thickness to allow for a fully accurate scale representation of the engine. These cowlings are held in place with small magnets to allow for easy removeable. The E Wing with its two 20mm cannons and two 12.7mm Browning machine guns is faithfully reproduced.Highly detailed Packard Motor built Merlin 266 engine, including oil tanks and supercharger.Movable elevators, rudder, and ailerons. Flaps can be depicted in up or down position. Landing gear parts included to depict either up or down position (interchangeable). Complicated frame configuration of the cockpit features realistic bulkheads and frames. Photo-etched parts to depict details such as wheel covers, cockpit area including instrument panel and seat belts with or without pilot included. Includes 1 seated and 1 standing pilot figure. Three kinds of markings included as is a display stand which enables you to depict the plane in flight.Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Website: 1 (
explain )
(Prod Ref #86198)
Tamiya 1/32 USAF F-15C Eagle Aircraft Kit (60304)
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available from shops: Cardiff: 1(
explain )
(Prod Ref #84271)
Tamiya 1/32 Grumman F14A Tomcat Black Knights Aircraft Kit (60313)
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available from shops: Cardiff: 1(
explain )
(Prod Ref #30954)
Tamiya 1/32 USAF F-4 C/D Phantom 2 Aircraft Kit (60305)
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #84273)
Tamiya 1/32 MD F-4J Phantom 2 US Jet Fighter Kit (60306)
The F4-J, which became the representative version of the Phantom series in the U.S. Navy has been reproduced in full detail as a 1/32 scale model. Canopy can be assembled in opened or closed position. Kit comes with replicas of air-to-air missiles, a full array of weapons options, and 2 pilot figures. Model length 21.9 inches.
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #45852)
Tamiya 1/32 MD F-4J Phantom 2 Marines Jet Fighter Kit (60308)
The 101st Fighter Squadron of the Navy became the first to be outfitted with the F-4J in 1966, and the Marines in 1967. It broke record after record, including top-speed, altitude, and time-to-climb. On September 11, 1972, The F-4J shot down a MiG-21 near Hanoi, in the Vietnam War. That was the only time a MiG was downed by a U.S. Marine aircraft. The F-4J remained with the Marines until 1991. Battling in five major conflicts, spanning over three decades, the Phantom II earned a special place in warplane history
Length: 22" (55.5cm)
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #45853)
Tamiya 1/32 McDonnell Douglas F-4E Phantom 11 Early Production (60310)
Assembly kit of the early production version of the F-4E Phantom II main fighter of the U.S. Airforce. Scale: 1/32, fuselage length: 600mm, wingspan: 368mm. The intrepid form of the F-4E Phantom with its characteristically elongated nose, has been accurately reproduced. Fuselage has been molded as one piece with intricate areas faithfully recreated. Main pieces can be fastened to fuselage with screws. Plane's nose can be reproduced with clear parts to allow viewing of the details of the 20mm M61A1 6 barrel Vulcan gun pod and AN/APQ-120 radar after model assembly. Exquisite detail of cockpit and instrument panels portrayed in superb detail. Canopy can be assembled in the open or closed position. Landing gear reproduced with dye-cast parts and tires are recreated with real rubber. Parts for recreation of full armament, such as air-to-air missiles, are included in kit. Kit also features pilot and co-pilot figures as well as decals for replication of two different planes.
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #30758)
Tamiya 1/32 USAF F-15E Bunker Buster Aircraft Kit (60312)
What a fabulous kit!
The popular F-15E Strike Eagle (Item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the changes in times and aviation fighting technology Tamiya has decided to modernize its kit in response to the various renewals made on the plane that has been active in the Gulf War, Kosovo, and Afghanistan. This kit will feature accurate replicas of all the latest weapons systems employed by the F-15 Strike Eagle, and will even include the famous "bunker buster."
Included parts for replicating 2 of the following - GBU-28, AGM-130, JDAM. The GBU-15 guided bomb (the AGM-130 without rocket can be assembled). Parts for replication of GBU-10, MK-20 Rockeye and Sidewinder missiles included in original F-15E Strike Eagle kit are featured in this kit as well. Replicas of four ARAAM missiles, two 610 gallon tanks can be attached below the wings. Decals for portrayal of two or more planes have been included. These, combined with decals of the previous kit enable the depiction of 7 different F-15E Strike Eagles. Landing gear has been recreated with die-cast metal, and tires have been reproduced with synthetic rubber for added realism. Cockpit has been rendered with scrupulous detail. 2 figures are included (pilot and weapons system operator) in the seated position
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #28715)
Tamiya 1/32 USAF F-16C Thunderbirds Aerobatic Display Team Plane (60316)
New parts accurately depict Block 32 characteristics like smaller air intake, wingtip launchers, engine nozzle, cockpit and landing gears. Comes with 2 interchangeable parts to depict engine nozzle either open or closed. Large display stand features 3 adjustable angles to depict the Thunderbird F-16 in flight. Decals allow choice of 2 colorful marking schemes unique to the Thunderbirds team. Includes fully accurate Thunderbirds pilot figure and ladder. Metal pitot tube and static dischargers, and die-cast landing gear provides extra durability. Main tail flaps and vertical tail fins can move after assembly thanks to poly caps. Vertical tail fin can be removed after assembly allowing model to be stored in box.
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #52341)
Tamiya 1/32 Mistubishi A6M5 Zero Fighter Model 52 Zeke (60318)
Assembly kit model of the A6M5 Zero Fighter model 52 Zeke which fought in the latter stages of WWII. Model length: 285mm, width: 344mm. The beautiful body line from the uniquely curved engine cowl to the wings is faithfully reproduced. In addition to the realistically reproduced fuselage, the Nakajima "Sakae" type 21 engine and the cockpit interior are highly detailed.The rudder, flaps, and the lower fuselage parts are all moveable. Your choice to have either open or closed cowl flaps and canopy.Included metal parts ensure a sharp finish for the 20mm cannons and pitot tube. Machine gun barrels have been pre-painted.Photo-etched parts depicting metal parts such as air intake mesh and seatbelts are included for greater realism.Supplied with four types of decals including one all-new option as well as masking seals for the canopy.Two pilot figures in standing and seated positions are included. A display stand to depict the Zero "In-Flight" is also included.
Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #58177)
Tamiya 1/32 USAF P-51D Mustang World War 2 Fighter Kit (60322)
Overall Length: 308mm, Wingspan: 354mm. The unmistakable form of this famous aircraft is accurately reproduced based on actual design drawings of the aircraft as well as thorough study of actual examples of the aircraft. Comes with the necessary parts to enable depiction of early-production and late-production P-51D, including: 2 types of tail sections (with and without dorsal fin) 3 types of canopies 4 types of rearview mirrors 2 types of instrument panels 2 types of seats 2 types of engine exhausts Control surfaces (ailerons, flaps, elevators, and rudder) are all movable. Magnets allow easy attachment/detachment of the ultra-thin engine cowlings even after assembly to showcase the detailed Packard Merlin V-1650 engine. Parts are included to allow depiction of landing gear in retracted or deployed positions. Landing gear tires are made from solid rubber and feature accurate tread patterns. Comes with a display stand to depict the aircraft in flight. A set of photo-etched parts is included to depict details such as seat harnesses and the oil cooler. 2 types of drop tanks included. Comes with 2 pilot figures (1 seated, 1 standing) and 3 types of distinctive decal markings. A) 334th Fighter Squadron, 4th Fighter Group B) 487th Fighter Squadron, 352nd Fighter Group C) 79th Fighter Squadron, 20th Fighter Group A 16 page full-color photographic reference manual is included. Glue and paints are required to assemble and complete the model (not included)
Click on the More link to view related products.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #48625)
