Period of Service: 1975 - present; primarily with the Royal Navy. Single engine, single seat, vertical take-off/landing fighter.

Detailed 1/48th scale plastic kit for static display. Markings included for 3 different aircraft. Appx. 80 parts in light grey and clear with delicate raised panel lines. Complete Pegasus 11 engine with removable engine access panel, detailed intakes, and swivelling engine nozzles. Cockpit detail: seat, cockpit tub with side consoles, instrument panel with decal for instrument faces and controls, and seated pilot. Ordnance options include: bombs and Sidewinder missiles. 4 swivelling engine nozzles for thrust vectoring.

Highly detailed 1/48th scale plastic kit for static display. Markings included for 5 different aircraft.
Appx. 150 parts in olive green and clear with fine recessed panel lines. Complete weapon load including: (6) AGM-65 Maverick, (1) GBU-8, (1).
GBU-10, (6) Mk.82 500lb bombs, (1) Mk.20 bomb, and (1) ALQ-119 pod. Cockpit detail includes instrument panel with decal for instrument faces and side consoles, 4 part ejection seat, and seated pilot. Detailed nose and main landing gear, wheel wells, and boarding steps. 30mm Gatling gun capable of 2100-4200 rounds per minute, 10 hard- points for 16,000lbs of ordnance, and titanium armoured cockpit.

Highly detailed 1/48th scale plastic kit for static display. Markings included for 3 different aircraft.
Approx. 120 parts in light grey and clear with fine recessed panel lines. Optional parts for intake ramp in subsonic and supersonic configurations. 4-piece ejection seat. 2-part windshield/canopy may be posed open or closed. Detailed nose gear with landing lights and door retraction strut. Cockpit detail includes rear electronics bay with sidewall detail, cockpit side consoles with decal, instrument panel with decal instrument details, and seated pilot figure. 1 centerline and 2 wing mounted external fuel tanks. 4 AIM-9L Sidewinder and 2 AIM-7F Sparrow missiles. Detailed Hughes APG-63 radar visible under removable nose cone. Pratt & Whitney F100-PW-100 turbofans; Mach 2.5 max speed; armed with 20mm rotary cannon, AIM-9L Sidewinder and AIM-7F Sparrow missiles.

The Supermarine Spitfire I was the British Royal Air Force's premiere fighter during the first two years of WWII and, with the Hawker Hurricane, formed the backbone of the defence against the German Luftwaffe during the Battle of Britain. Tamiya's rendition of the Spitfire I builds up into an impressive, highly detailed 1/48th scale replica with lots of interior and exterior detail. High quality water activated decals are included for two specific aircraft.

Britain's most recognised aircraft of WW2 this version depicts the tropicalised adaptation used in the desert.

Requires polystyrene cement and paint to complete the model.

A superb kit of the US's best carrier born fighter. The Bird Cage Corsair.

It's not widely known, but P-51's also served extensively with the British Royal Air Force during WWII. The Mustang III was the RAF equivalent of the P-51B with a Rolls-Royce Merlin engine and the "razorback" fuselage. Tamiya's rendition of the RAF Mustang builds up into an impressive, highly detailed 1/48th scale replica with accurate interior and exterior detail. High quality water slide decals are included for three aircraft.

Highly detailed 1/48th scale plastic kit for static display. Markings included for 3 different aircraft. Approximately 75 parts in light grey and clear with fine recessed panel lines. Wing mounted Rolls-Royce W.2B/23 centrifugal flow turbojets of 1700lb thrust; armament was for nose mounted cannons. Two complete engines included complete with optional clear panels which allow them to be displayed in postion on the model.
Introduced in 1944 - later versions served into the 1950's. Landing gear detail includes accurate struts with mudguards and door retraction struts on main gear. Nose weight is included. Cockpit detail includes: instrument panel with decal for instrument faces, seat with seatbelt decal, control stick and side consoles. Detailed jet engines are each made up of 9 pieces. Canopy may be posed open or closed and seated pilot figure is included. Wheel wells are enclosed and have many structural details.

Markings included for three U.S. Navy aircraft. About 195 parts in light grey and clear with fine recessed panel lines. Detailed landing gear, gear doors, and wheel wells. Cockpit detail: control stick, instrument panel, one-piece cockpit tub, seated pilot figure, and seat. Open and closed cowl flaps, separate wing flaps, optional position dive brakes, and a large selection of rockets, bombs and drop tanks provided.

One of the best fighters of world war 2 was the German Messerschmitt BF109E. Modeled by Tamiya to give an excelent model

Approximately 100 parts in black and clear with fine recessed panel lines. Twin radial engined, heavily armed fighter aircraft with a crew of two. Optional parts for radar equipped night fighter and rocket armed fighter-bomber, including different observer's clear blister. Interior detail includes cockpit, observer/gunners seat and instruments, fuselage rib and stringer detail. Cockpit detail includes instrument panel with decal for instrument faces, seat with seatbelt decal, control stick and side consoles. Detailed Bristol Hercules sleeve valve engines with poly bushing which allows props to spin and be added after the kit has been assembled and painted avoiding breakage. Detailed landing gear with enclosed wheel wells. One of the first radar equipped nightfighters used in the defense of Britain; ground attack and close air support; anti-shipping missions. 1670hp Bristol Hercules engines, 12 degree tailplane dihedral to improve stability.

The Bristol Beaufighter was a sturdy and well-armed craft that fulfilled a wide variety of duties during WWII. The favored role of this effective craft was ground and ship attack. When the TF.Mk.X was introduced with a 1770 horsepower plant it became an even more popular anti-shipping craft. Commonly, Beaus would attack in two waves where first, rocket equipped beaus would weaken axis ships, and torpedo equipped beaus would come clean up the mess. In March 1945, in the span of forty-eight hours, two squadrons of Beaufighters destroyed five U-boats.

Fuselage length: 290mm, wingspan: 288mm The unique shape of the fuselage and wings of this unlikely aircraft have been recreated in outstanding detail. Model features bomb hatch which can be modeled in the open or closed position. The canopy can also be set in open or closed position, and contains one pilot figure. Kit includes one 500kg bomb and decals for three types of planes. 

Authentic scale model of the unique Kettenkraftrad ground vehicle with front wheel and caterpillar tracks crisply recreated without sparing the slightest detail. Form of the Me262, with its swept-back wings and attached engine pods has been faithfully recreated in this model. Details of the cockpit and 30mm cannons have also been accurately portrayed. Canopy and cannon covers can be assembled opened or closed. Two types of bomb racks are available for assembly. Replicas of two 250-pound bombs and two take-off assistance booster rockets have been provided in kit. Front landing gear bay has been made of die-cast aluminum and is weighted for balance. 3 pilot and ground crew figures included. Kit also features decals for recreation of 3 different planes.

On April 1944. The F4U-1D became the first Corsair version to be officially approved for carrier operation. the small moto tug which is included with this model was ideal for manoeuvring the aircraft on carrier runways. Requires polystyrene cement and paint to complete the model.

This is the representation of P-47D early production that was nicknamed “razorback” because of the shape of the upper part of the fuselage behind the cockpit. The shape of the plane, especially its belly, has been accurately reproduced. Wing have been divided the same way as the original plane and beams ease their assembly while maintaining proper dihedral (angle of wings attached to fuselage). Flaps can be assembled in low or up position. Cowl flaps and inter-cooling flaps can be assembled in open or closed position. Parts for replication of 1 X 160-gallon flat type drop tank, 2 X 180-gallon drop tanks, 2 X 500 pounds bombs and 2 X 4.5in M10 rocket launchers are included in the kit. 3 different propellers, 2 Curtis and 1 Hamilton Standard, and a pilot figure are featured in the kit, as well as three types of gun sights and mirrors. 2 types of markings for 56th Fighter Group planes are included. Decals for Two Different Markings are provided. Including the aircraft shown in the pictures, decals for two different markings are included in the kit.

Overall length: 230mm, Overall width: 259mm width.The late production that was nicknamed "Bubbletop".The massive form of the plane, especially its belly and its cowling, has been accurately reproduced. Flaps come as separate parts and can be attached in the up or down position. Parts for replication of 3 types of mirrors, gun sights and 4 types of propellers are provided. Engine cowling flaps and the intercooler air outlets on each side of the fuselage can be represented in the opened or closed position. Parts for replication of 500-pound bombs, rocket launchers and 3 types of drop tanks are part of the kit. A pilot figure and decals for two different markings are included.

Tamiya presents the plastic assembly kit of the Messerschmitt Me262 that was used by the Luftwaffe during the closing days of WWII. 1/48 Scale, Overall Length: 221mm, Overall Width: 264mm. The unique form of the Me262 with its engine nacelles under each wing has been accurately replicated. The 4 X 30mm cannon mounted in the nose, the cockpit, internal equipment, and the two Jumo004B engines have been reproduced down to the finest details. Canopy and gun bay access panels can be mounted in either open or closed position. Engines can be displayed in engine nacelles or on maintenance cart for which parts are included. R4M air-to-air rockets with launchers to be mounted under the wings and W.Gr 21 air-to-air rocket-launchers to be assembled under the nose are part of the kit. Nose wheel well comes as a die-cast weight. A pilot figure and newly designed decals for 3 different markings are included in the kit.

Introducing the export version of the Buffalo as used by the RAF and Netherlands East Indies Army Air Corps (ML-KNIL) in East Asia during WWII. Kit includes parts to reproduce either the land based RAF or ML-KNIL B-339 planes or a U.S. Navy F2A-2 plane.Comes with 2 figures plus Cartograf decal markings for 1 U.S. Navy, 1 ML-KNIL and 2 RAF planes.

Following the release of 1/48 Republic P-47D Thunderbolt “Razorback” and “Bubbletop” versions, Tamiya further increases the range of choices available to modelers with the development of the P-47M. New parts for depicting late-war P-47M include 1/ Choice of 3 types of vertical dorsal tail fin. 2: Air bakes fitted under wings, behind landing gear, with landing lights relocated to wing tips. 3: Flat type cockpit floor, instrument panel, rudder pedal and side walls made from new parts. 4: Decelerator located on engine front. 2 all-new sets of markings based on dark-blue/blue patterned camouflage used by the 56th Fighter Group of the 8th Air Force. Kit also includes all parts necessary to build P-47M or P-47D Bubbletop versions with or without dorsal tail fins, vastly increasing modeling options.

Following the Messerschmitt Me262, Tamiya's release a second WWII German jet fighter with the Heinkel He162 Salamander. This truly innovative machine, which firmly established Germany as possessing the most advanced aviation technology of the time, deserves a high quality and richly detailed model to do it justice.

Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. Sleek fuselage including aerodynamic blended wing body design accurately reproduced. Accurately curved bubble top canopy can be assembled in the opened or closed position. Horizontal stabilizers are movable and flaperons can be modeled in both the up or down positions. A range of weapons and accessories are included such as HARM, AMRAAM, and Sidewinder missiles (M & X variants), detachable external fuel tanks, ECM pod, and HTS pod. One pilot figure included and can be depicted with either standard or JHMCS flight helmet. Detailed markings for 3 aircraft, including the 5th Air Force commander's aircraft stationed at Misawa airbase in 2005, are included.

Detailed assembly kit model of the Fairey Swordfish Mk.II. Features specific to the Mk.II, such as the metal lower wing and large oil cooler are all accurately reproduced. Formidable rocket armament, exhaust damper, and included invasion stripe markings further distinguish this kit from the earlier Mk.I. Use with ITEM 61069 Fairey Swordfish Photo-Etched Bracing Wire Set for even more realistic rigging detail. 3 figures and 3 types of markings included.

Tamiya's signature 1/48 scale Aircraft Series has now reached its 100th model! To mark this special milestone, we are announcing an all-new Fi 156 Storch assembly kit, which gives modelers further opportunity to create mixed-genre dioramas involving both aircraft and vehicles.

Kit includes parts to replicate various versions of the Fi 156C, including fuel tank, skis, and 3 different types of canopies. Clear canopy sides have been molded together with the fuselage halves for more realistic construction. Important structural sections such as the wing spar and the landing gear struts are made from metal parts for enhanced realism and strength. Includes 1 pilot and 1 commander figure. Precision photo-etched parts such as cockpit panels, cockpit frame, and front seat also included.

Assembly plastic model kit based on the masterpiece bomber of the RAF, the Grand Slam Bomber (Lancaster BI Special 22000lb. Bomb). Scale: 1/48, fuselage length: 441mm, wingspan: 648mm-a model impressive in both detail and size. Kit features a pre-painted canopy and unpainted canopy to offer modeler with choice. Model overflows with detail from the intricate suspension to the tires that appear to deform under the weight of the aircraft. Model comes to life with four micro-motors that allow the four propellers to really spin when the Grand Slam bomb is slid back. One UM2 alkaline battery required (sold separately). Battery positioned in bomb storage bay for easy access. Four realistically recreated flight-crew figures, one ground-crew figure and two types of markings for aircraft of 617 Squadron top off this highly authentic recreation. Recommended Tamiya Colors: AS-22 Dark Earth, AS-9 Dark Green, AS-11 Medium Sea Gray.

When the first Fw190's appeared in 1941 they were a serious threat to RAF air superiority in the skies over occupied France. Their 1700HP BMW801 radial engine and superb maneuverability gave them a performance edge that was not challenged until the RAF started receiving the improved Spitfire Mk IX. The Tamiya Fw190 A-3 builds up into a highly detailed 1/48th scale replica and includes high quality water activated decals for three aircraft.

Highly detailed 1/48th scale plastic kit for static display. Markings included for 3 different aircraft. Approximately 100 parts in light grey and clear with fine recessed panel lines. Optional parts for radar equipped night fighter and rocket armed fighter-bomber including different observer's clear blister.
Interior detail includes cockpit, observer/gunners seat and instruments, fuselage rib and stringer detail. Cockpit detail includes instrument panel with decal for instrument faces, seat with seatbelt decal, control stick and side consoles. Detailed Bristol Hercules sleeve valve engines with poly bushing which allows props to spin and be added after the kit has been assembled and painted avoiding breakage. Detailed landing gear with enclosed wheel wells.

Originating out of a private venture by the British deHavilland company to produce a high performance bomber from non-strategic materials, the Mosquito evolved into one of the most versatile and in demand aircraft of WWII. Made mostly from balsa wood, the Mosquito could fly fast enough and high enough to outrun any German aircraft that tried to intercept it for most of the war. The aircraft was used as a bomber, a nightfighter, a fighter-bomber, and a reconnaisance aircraft and proved highly effective in those roles. It was powered by two Rolls-Royce Merlin engines, the same engine used in the P-51, Spitfire, Hurricane and Lancaster, just to name a few.

The RAF's Gloster Meteor was the first and only operational Allied jet fighter to actually enter combat in WWll. This kit makes up into a fine model of this famous jet aircraft. Requires cement and paint to complete the model.

Requires polystyrene cement and paint to complete the model.

Probably the best German fighter of world war 2 this model is of the A8/A8R2 version of the Focke Wulf FW190.

Developed under incredible secrecy by Lockheed's "Skunk Works," which also developed the U-2 and SR-71 Spyplanes, the F-117A was the first airplane designed to be invisible to enemy radar. Its unusual shape is a consequence of this requirement. F-117A's flew many of the most dangerous missions of the Gulf War and none were lost to enemy fire thanks to its amazing and unique stealth capabilities.

Wingspan: 11" (27.6cm). Length: 16-3/4" (42.6cm). Single sheet of decals which contains national insignia, stencils and ID codes for 2 aircraft 1/ Lockheed F-117A, A/C #813 "Toxic Avenger", 37 TFW, 416 TFS, "Ghost Riders." 2: Lockheed F-117A, A/C #828, 37 TFW, 417th TFTS "Bandits."

The Supermarine Spitfire Vb was introduced into service in 1941 and represented the first of many major upgrades to maintain the fighter's ascendency over its adversaries, which, in this time frame, was primarily the Messerschmitt Bf109. Tamiya's rendition of the Spitfire Vb builds up into an impressive, highly detailed 1/48th scale replica with lots of interior and exterior detail. High quality water activated decals are included for three aircraft

Wingspan: 9-1/4" (23.4cm). Fuselage Length: 7-1/2" (19.3cm)

Requires polystyrene cement and paint to complete the model.

North American's Mustang was one of the most important and effective of all fighter aircraft to serve during WWII. This kit represents the definitive P-51D which was used on long range escort duties in the Pacific and Europe. Tamiya's rendition of the Mustang builds up into an impressive, highly detailed 1/48th scale replica with accurate interior and exterior detail. High quality water slide decals are included for four aircraft.

The Fw190D-9 was developed in an effort to give the fighter sufficient performance to intercept the high altitude formations of B-17's and B-24's flying over occupied Europe. Increased performance was achieved by installing the liquid cooled 1750HP Jumo 213 which required a much longer fuselage. Tamiya's Fw190D-9 builds up into a highly detailed 1/48th scale replica and includes high quality water activated decals for three aircraft.

The first Allison powered P-51's were good airplanes but lacked the high altitude performance to be effective bomber escorts. That changed when the basic P-51 airframe was mated with a Rolls-Royce Merlin engine to create the P-51B. Tamiya's rendition of the Mustang builds up into an impressive, highly detailed 1/48th scale replica with accurate interior and exterior detail. High quality water activated decals are included for three aircraft.

Wingspan: 9-1/4" (23.5cm). Fuselage Length: 8" (20.5cm).

After WWII it appeared that the North American P-51D's days in front line use were limited because of the advent of the jet age. The conflict in Korea brought the aircraft out of reserve and back into action but as the F-51D. Tamiya's rendition of the Mustang builds up into an impressive, highly detailed 1/48th scale replica with accurate interior and exterior detail. High quality water activated decals are included for three aircraft

Wingspan: 9-1/4" (23.6cm). Fuselage Length: 8" (20.5cm)

When the Messerschmitt Bf109 first flew in 1936 it was, in many ways, the most advanced fighter aircraft in the world. The design was continually improved and the first E-models came into service at the start of WWII. The E-3, which this kit represents, was active during the invasion of France and the Battle of Britain.

The British Air Ministry was reluctant to order the production of the DeHavilland Mosquito until it had witnessed what it was capable of. Once proven, the Mosquito was used to bomb Gestapo headquarters and Berlin in several successful attacks. Because the Mosquito could carry heavy loads, and deliver low altitude suprise attacks with accuracy, it performed all of its' duties with minimal losses

The style of the Corsair F4U-1A of the Pacific War has been recreated with stunning attention to detail. The high positioned pilot seat and double frame canopy show crisp detail. Gull wings, unique to the Corsair can be assembled in the folded or flight position. Features 1000lbs bomb, additional fuel tank, and two pilot figures (one for sitting in cockpit and one for standing on wing). Includes markings for two aircraft. Model length 8.1 inches. Glue and paint are required, and are sold separately.

Ready to assemble precision model kit. Detailed single seat cockpit. Fuselage and wing drop tanks. Detailed engine with 4-blade propeller. One pilot. Ventral and side dive brakes. Detailed landing gear, landing gear doors, and tail wheel. Heavily armed with: Mk.82 LDGP bombs, M117 bombs, LAU-3 rockets pods, LAU-68 rocket pods, SUU-11 7.62mm gun pods, SUU-14 rocket tubes. Detailed pictorial instructions, which also includes a brief history regarding the Skyraider.

Fuselage parts can be assembled with either normal or clear parts. Semi-transparent decals for clear fuselage parts are included. Detailed cockpit with pilot, observer and gunner figures. Recessed panel lines give authentic look. Detailed landing gear. Amazing detail of steel-pipe frame, instrument control panel and wireless radio. Detailed air cooled Bristol Pegasus radial engine. Bombs and torpedos are included. Main wing can be modeled in the folded position. Profound detail, down to the ribs protruding through the cloth of the wings and fuselage to the rivets on the metal cowling around the nose.

212mm wingspan, 213mm-long fuselage. Kit includes both original color and transparent fuselage parts. The characteristic swept wing and high T tail are authentically replicated. Static thrust VK-1 engine also accurately recreated. Dolly-stand included in rear-part of fuselage. Canopy and air-brakes can be assembled in either the opened or closed positions. Additions to the original MiG 15 kit include extended air duct and internal fuel tank. Special see-through type decals also included. Requires polystyrene cement and paint to complete the model.