 more | Dragon (Plastics) 1/35 US M270 MLRS w/M26 Rocket Pods (3523)
| |
 more | Dragon (Plastics) 1/35 M1 Panther II Mine Detection and Clearing Vehicle (3534) The modern battlefield calls for specialized engineering equipment and the M1 Panther II ably answers that summons. This 43-ton American armoured vehicle is basically an Abrams modified for mine clearing, with the turret removed and mine rollers attached to the front. But it’s more than that, for it possesses a Standardised Teleoperation System which allows it to be operated remotely from up to 2,600 feet away. Thus instead of endangering the lives of combat engineers with mine detectors, the M1 Panther II can be enlisted for clearing minefields at the rate of 5,000 square-meters per hour. | |
 more | Dragon (Plastics) 1/35 US Sherman M4A1 75mm Early Version Plastic Kit (6048)
| |
 more | Dragon (Plastics) 1/35 German 2.8 Spzb41 Anti Tank Gun & Crew WW2 Model Kit (6056)
| |
 more | Dragon (Plastics) 1/35 Sturmpanzer IV Brum LT SDKFZ (6081)
| |
 more | Dragon (Plastics) 1/35 Sherman M4A3 76 W American Tank Kit (6083) The Sherman was the mainstay of the Allied armored units, with over 40,000 produced from 1942 onwards. The ubiquitous Sherman was to be found in the ranks of every Allied army in World War II and on every front.
One of the most easily distinguishable variants was the M4A1, which utilized a cast hull rather than the welded hull of the others. Later, a 76mm gun was introduced to give the tank more lethality against heavily armored German opponents, but this required installation of a new turret big enough to carry the gun. When combined together – the M4A1 hull, 76mm gun and turret – the M4A1(76)W was conceived.
Now Dragon introduces a fantastically accurate version of this same tank for all connoisseurs of the famous Sherman, complete with numerous “goodies”. This new kit is the ONLY one superb rendition that incorporates all the latest high standard Sherman parts to produce our best Sherman kit yet! | |
 more | Dragon (Plastics) 1/35 German Railway Gondola with AA Gun Crew (6086)
| |
 more | Dragon (Plastics) 1/35 German SdKfz 250/9 2cm Recon Halftrack Model (6106)
| |
 more | Dragon (Plastics) 1/35 German SdKfz 250/1 le Spw Alte Halftrack Model (6117)
| |
 more | Dragon (Plastics) 1/35 Sd.Kfz 250/3 Greif (6125) A highly detailed model kit containing over 400 finely detailed moulded plastic parts to build an accurate model of the Sd.Kfz. 250/3 Grief, complete with two officers and field glasses. Decals are included for two vehicles, one serving with the Afrika Korps, the other on the Eastern front. | |
 more | Dragon (Plastics) 1/35 German WW2 3cm Falkpanzer IV Kubelblitz Kit (6136)
| |
 more | Dragon (Plastics) 1/35 German WW2 Sd.Kfz 250/10 C/W Pak 37 kit (6139)
| |
 more | Dragon (Plastics) 1/35 German Pz. Kpfw 1 Ausf B (6186) The Pz.Kpfw. I Ausf. B (Panzerkampfwagen I Ausfuehrung B1) was a light tank that was operated by 2 crewman. From August 1935 - June 1937 Germany produced 675 units. | |
 more | Dragon (Plastics) 1/35 Sherman M4A2 Tank (76) Red Army (6188) The American "lend and lease system" was introduced in the beginning of the war to support Great Britain. The Red Army also received aid such as food, fuel etc after the German's assault on Russia in June 1941. Since then, the Red Army has used extensive numbers of lend-lease tanks. The Red Army received the highest numbers of the M4A2 in 1944. Some tank corps and mechanized corps were entirely equipped with this tank. | |
 more | Dragon (Plastics) 1/35 German Sd.Kfz 251/16 Ausf c Flammpanzerwagen (6202)
| |
 more | Dragon (Plastics) 1/35 German SDKFZ 251/21 Ausf D Schutzenpanzer (6217) The SdKfz 251/21, also known as the Mittlerer Schutzenpanzerwagen - Drilling MG 151, was a very effective production anti-aircraft version of the SdKfz 251 halftrack. Mounted with three excellent 15mm MG 151/15 or 20mm MG 151/20 machine guns on a compact pedestal behind a small armored shield, having a rate of 700 rounds per minute per gun, these modified SdKfz251 halftracks could provide very effective defensive fire against the Allied aircraft. more.. | |
 more | Dragon (Plastics) 1/35 German Flakpanzer 1 Plastic Tank Kit (6220) This kit features loads of new parts including a completely new Panzer I chassis. The new frontal armour is assembled from photo-etched and slide-moulded parts for greater details. Both front and rear armour can be assembled in combat or transport mode. Slide-moulded parts provide the superb transmission. The newly designed batteries case with interior detail make this model just great. The suspension has been newly tooled along with the Idler gear and OVM make an improvement on the chassis. The Drivers area has been upgraded with a visor that can be assembled open or closed, a seat and controls have intricate detail, as does the instrument panel. The 2cm Gun is protected by a new gun shield and can be elevated in different positions. Slide moulded one piece gun barrel has a hollow muzzle opening of which there is a choice of three. The Gun sight and cradle are well detailed with even weld seams presented. There is a spare barrel case w/spare barrel moulded inside and with ammo clip and ammo boxes this make for excellent detail. You can have the Optional spent shell case frame with photo-etched net and pre-formed photo-etched spent shell case. The trailer can be portrayed in transport or at rest mode and has well defined details. This is finished off with Cartograf decals.more.. | |
 more | Dragon (Plastics) 1/35 Pz.Kpfw.265 Kleiner Panzerbefehlwagen (6222) The Kleiner Panzerbefehlswagen is a variant of the German Panzer 1. The Panzer I was a tank produced by Nazi Germany in the 1930s, intended as a training tank, but also used extensively in the Spanish Civil War and early World War II. It served as the basis for the Pzkpfw II; other vehicles based on the chassis included self-propelled guns and antiaircraft artillery.
The Kleiner Panzerbefehlswagen (SdKfz 265) was a Command tank, with fixed 14.5 mm armoured superstructure, single machinegun and extra radios for control of armoured operations. 190 to 200 were converted from mainly Ausf B, some Ausf A Panzer 1's. | |
 more | Dragon (Plastics) 1/35 German Sd.Kfz. 251/7 Aust. D Halftrack Plastic Kit (6223)
This kit can be assembled into one of these 3 different Pioneerpanzerwagen's: - Standard engineer vehicle, Command vehicle used by HQ companies or a Vehicle mounted with 2.8cm AT gun.
This kit features Dragon's "EZ Track" technology: Assembling individual track links can be a laborious, time-consuming task... until Dragon came up with the solution, that is. EZ Track takes away all of the frustration of removing links from sprues and having to clean them up. Instead EZ Track offers you pre-cut, ready-to-assemble links. Assemble and glue them like normal individual links, but say goodbye to all that agony of filing and sanding them! | |
 more | Dragon (Plastics) 1/35 British WW2 Sherman Mk3 Sicily Tank Kit (6231)
| |
 more | Dragon (Plastics) 1/35 Jagdpanther Early German WW2 (6245)
| |
 more | Dragon (Plastics) 1/35 German Sd.Kfz.251/16 Ausf D Flammpanzerwagon Plastic Kit (6247) This German Halftrack model feature of the Ausf. D version feature the flamethrower conversion hence the name, Flammpanzerwagen. It includes numerous NEW parts including the flamethrowers, projector shields, guardrails, decals and more Newly tooled flame projectors, projector shields and metal guard rails around the projectors. Photo-etched parts for the rail guards mount and Precisely moulded fuel supply devices including fuel pipes and hoses and Twin Tanks, Detailed fuel pump and petrol engine. Both Front & rear Machine Gun mount can rotate.Brass width indicator poles and Silver decals for side mirrors give a realistic presentation of the real item. The 2 Flamethrower operators are modelled in flameproof overalls, and addition pair of masked heads is supplied along with the driver. The decals are from Cartograf giving their normal brilliant standard.more.. | |
 more | Dragon (Plastics) 1/35 German 7.5cm PAK 40 Anti tank Gun with Heer Crew (6249) German 7.5cm PAK 40 Anti tank Gun with Heer Crew | |
 more | Dragon (Plastics) 1/35 15cm s.IG33 (sf) auf P Tank (6259)
| |
 more | Dragon (Plastics) 1/35 German PzKpfw 2 Ausf F Tank Kit (6263)
| |
 more | Dragon (Plastics) 1/35 German Sd.Kfz.251/2 Halftrack with Wufrahmen 40 (6284)
Containing over 750 parts this kit can be built inot a model of one of three Sd.Kfz 251 varients with rocket launcher crates or 37mm PAK field gun. Plastic parts are finely detailed and include many interior detailing parts. Etched brass has been used for the highly detailed gun shield and many other fine parts. A turned aluminium barrel is supplied for the 37mm PAK 36 gun barrel along with brass width indicators. more.. | |
 more | Dragon (Plastics) 1/35 German 88mm Flak 37 3 in 1 (6287)
A superb kit to build one of three versions of the German 88mm Flak 37 gun, featuring 400 parts in plastic and metal. The main body of the gun and carriage are highly detailed, finely moulded in plastic. Turned aluminium gun barrel sections are supplied for the type 18 or type 36/37 barrel, plus turned aluminium equilibrators and recuperator. Specific additional moulded plastic detail sections for each barrel type and optional breech mechanism parts are included. Extra parts include ammunition boxes, brass and plastic rounds with etched shell end lettering discs, metal chains and a range finder with chest harness case. A highly detailed assembly sheet is included. | |
 more | Dragon (Plastics) 1/35 German PzKpfw 38T Ausf G with Interior Tank Kit (6290)
| |
 more | Dragon (Plastics) 1/35 German Panzer 4 Pz.Kpfw.IV Ausf C Model Tank Kit WW2 (6291) This kit features the Ausf. C version of the early-war Panzer IV series. It is a product of intensive research, and makes extensive use of slide-mold technology for enhanced detail. This kit is packed with high quality injection molded parts, photo-etched components, an aluminum gun barrel, and a many other multi-media elements. Great care has been taken to develop a kit that is accurate and easy to assemble for modelers of all ages and skill levelsmore.. | |
 more | Dragon (Plastics) 1/35 German Sd.Kfz.251/17 Ausf. D with 2cm Schwebelafette (6292)
A kits with hundreds of highly detailed parts in plastic and etched brass to build a model of a German Sd.Kfz.251/17 armoured half track with 20mm cannon.
Full hull interior and crew compartment detailing is included, from the engine and transmission to a detailed gun pedestal. The 20mm Flak 38 gun features a one-piece hollow slide moulded barrel with removable feed cover and separate magazine. Three gun shield options are supplied in plastic, etched brass or pre-formed brass. A new design of ammo rack has been produced for this kit using etched brass for extra fine detailing. | |
 more | Dragon (Plastics) 1/35 German WW2 PzKpfw IV Ausf H Later Producton Tank Kit (6300)
| |
 more | Dragon (Plastics) 1/35 German Sdkfz250/9 2cm Reconnaissance kit (6316)
| |
 more | Dragon (Plastics) 1/35 German Ww2 Sd.Kfz.165 Hummel Late Production Self Propelled Gun Kit (6321)
| |
 more | Dragon (Plastics) 1/35 German Pz.Kpfw.VI Ausf.D WW2 Tank kit (6330)
| |
 more | Dragon (Plastics) 1/35 German Sd.Kfz.186 Jagdtiger Porsche Prodution Type Tank Kit (6351)
| |
 more | Dragon (Plastics) 1/35 German Tiger Sd.Kfz.181 Panzerkampfwagen V1(P) (6352) Dragon now adds this kit to their "Premium Edition" stock with more than double the parts of the original kit, adding "Magic Track" for the kit as well as a good-sized fret of etched brass and parts from their more recent "Slide Molded" Tiger I kits.
The "Magic Track" provides two kinds of links – an "A" link (parts R) with a guide tooth and a "B" link (parts S) that snap together. This should solve the complaints from those who want the track to sag properly (but probably getting grouses from the "one-piece track" fans for dropping the DS plastic ones!) The good news is the "Magic Track" links are some of the best around, needing minimal cleanup and replicating the originals very nicely.
The etched brass covers the original grilles as well as many other details and brackets that dress up the model. Some such as the device to the rear of the commander's cupola (MA31) are going to be somewhat difficult to shape but they do provide nice details. A styrene version (A9) is also provided | |
 more | Dragon (Plastics) 1/35 German 3cm Flak 38/103 Jaboschreck w/ trailer Plastic Kit (6353) a superb model of the German 3cm Flak 38/103 Jaboschreck with a trailer | |
 more | Dragon (Plastics) 1/35 US Sherman M4A3 1005mm HVSS Tank Kit (6354) The Medium M4 tank, better known as the Sherman, appeared in various forms throughout its stellar career with Allied armies. One of the lesser known variants is the M4A3 (105mm), of which five hundred were manufactured by Detroit Arsenal between April through August 1944. The 105mm Howitzer gun was fitted so that the vehicle could serve in the close support role, rather than in the usual tank role. They were not widely seen until the end of the Second World War. | |
 more | Dragon (Plastics) 1/35 German Panzer 1 Pz.Kpfw.I Ausf A with Interior Tank Kit (6356) Another superb model from the Dragon stable, Used in the Blitzkreig in the early parts of World War 2 | |
 more | Dragon (Plastics) 1/35 10.5 Dicker Max Self Propelled Gun Kit German WW2 (6357)
In terms of rarities, they don’t come much more unique than Germany’s Dicker Max. The catchy sounding name actually translates as “stout Max”, this being the name given to the prototypical tank destroyer mounting a long-barreled 10.5cm K18 gun. Only two vehicles were produced in 1941, both issued to the 521st Panzerjäger Detachment for a proposed attack on Gibraltar. When this never eventuated, they were transferred to the 3rd Panzer Division and saw combat on the Eastern Front in 1941.
This 1/35 scale model replicates the original vehicle as accurately as possible using all available references. Since this is an open-topped vehicle, no effort was spared in fitting out the interior of the fighting compartment with full detail. To realize this kit, slide molds were frequently employed to give maximum detail and yet keep assembly for modelers as simple as possible. | |
 more | Dragon (Plastics) 1/35 US WW2 M4 Half Track with 81mm Mortar (6361)
| |
 more | Dragon (Plastics) 1/35 US M16 Mutiple Gun Motor Carriage Smart Kit (6381)
| |
 more | Dragon (Plastics) Panther G W/Zimmerit Tank (6384)
| |
 more | Dragon (Plastics) 1/35 German sFH 18 Howitzer with Limber Gun Kit (6392) more.. | |
 more | Dragon (Plastics) 1/35 German Jagdpanther Late Production Self Propelled Gun Kit (6393)
| |
 more | Dragon (Plastics) 1/35 Sd.Kfz 251/16 Ausf c German Halftrack Model Kit (6395) This new 1/35 scale kit is a 251/17 Ausf. C half-track, a vehicle boasting a 2cm Flak 38 cannon. The gun was mounted to have all-round traverse, though the original conversion necessitated considerable rebuilding of the superstructure. Dragon Models has design and produce a completely new fighting compartment unique to this variant of half-track. Also, parts are newly tooled specifically for this kit, meaning there is no need for modelers to cut and rework the vehicle in order to produce a 251/17. Though the details and configuration are complex, clever engineering makes assembly a breeze. The kit obviously incorporates Dragon’s highly accurate 2cm Flak 38 gun, which has been released previously. The overall result is a kit that is very accurate, and offers modelers an even wider scope of Sd.Kfz. 251 vehicles to choose from and build. | |
 more | Dragon (Plastics) 1/35 German Stug 3 Ausf G Georg Bose Early Production Self Propelled Gun Kit (6417)
| |
 more | Dragon (Plastics) 1/35 Russian T34/76 Model 1941 Cast Turret Kit (6418) more.. | |
 more | Dragon (Plastics) 1/35 German SdKfz 250/1 WW2 Halftrack Model Kit (6427) D6427 New one-piece slide-molded lower hull
Suspension system is newly tooled
Newly tooled sprocket with multiple-part assembly to achieve higher levels of detail
Road wheels are newly tooled with precise detail
Newly tooled Magic Track for Sd.Kfz.250/1
New front wheels with multiple-part assembly for greater detail are included as option
Highly detailed sprocket mounts are separate parts
Two types of front wheels included as option
Storage box doors can be assembled open/closed
Bonus new tarp produced in DSGen2 MG42 included
Gen2 equipment for interior included as bonus
Upgraded weld seams authentically reproduced
New Cartograf decal offers accurate markings | |
 more | Dragon (Plastics) 1/35 German Heuschrecke IVb Grasshopper Kit (6439) more.. | |
 more | Dragon (Plastics) 1/35 7.5cm PaK 97/38 w/Heer Gun Crew (6445)
| |
 more | Dragon (Plastics) El Alamein Sherman (6447)
| |
 more | Dragon (Plastics) 1/35 SDkfz.166 Sturmpanzer 1V Brummbar Self propelled gun kit (6460) Dragon's "2 in 1" kit of the Brummbar represents a mid-production vehicle, and can be built as either a standard version or a command version with star antenna. This is a "Smart Kit," featuring the highest level of detail with the least amount of hassle. The kit features a highly detailed 150mm gun with rifling, and very basic fighting compartment detail (such as a floor with the correct texture). All hatches can be assembled open or closed. The running gear is all-new for this Brummbar, and includes two options for the idler wheels. Other newly tooled Brummbar-specific parts are included. The schurtzen side skirts are made of scale-thin metal, and can be added or removed individually, even after assembly. Tracks are provided as Dragon's "Magic Trak" indy links, are newly tooled, and are all cleaned up and ready for assembly (glue required). Also includes a fret of photo-etched metal detail parts, wire for the tow cables, clear parts, and Cartograf decals for three versions. No zimmerit included on this modelmore.. | |
 more | Dragon (Plastics) 1/35 German WW2 SdKfz.184 Elefant with Zimmerit Kit (6465)
| |
 more | Dragon (Plastics) Sd Kfz 138/1 Geschutzw Tank (6470) more.. | |
 more | Dragon (Plastics) 1/35 German Stug 3 Ausf G Early Production Self Propelled Gun Kit (6488)
| |
 more | Dragon (Plastics) 1/35 US 105mm M2A1 Howitzer & Carriage Kit (6499)
| |
 more | Dragon (Plastics) German Rocket Launcher with crew (6509)
| |
 more | Dragon (Plastics) 1/35 German Sdkfz 7/1 2cm Flakvierling 38 kit (6525)
| |
 more | Dragon (Plastics) 1/35 Jagdpanther Early German WW2 Kit (9012)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby German Stug 3 Ausf F & Sturmgeschutze Crew Loading Figure Set (9101)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby Sherman M4A4 & US Tank Crew Figure Set (9102)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby German Panther and Volkssturm Figure Set (9103)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby Sherman Firefly 1c Hybrid Hull & British Paratroopers (9104)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby German Panzer 4 & Kampfgruppe Peiper Figure Set (9105)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby German Stug 3 Ausf E & Sturmartillerie Crew Set (9106)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby US M26A1 Pershing Tank & US Anti Tank Team (9107)
| |
 more | Dragon (Plastics) 1/35 US Sherman M4A2 Tarawa Tank Kit (6062) The Medium Tank M4 was the main tank designed and built by the United States for allied forces in World War II, totaling roughly 50,000 tanks plus thousands more derivative vehicles under different model numbers with different abilities. In the United Kingdom lend-lease M4s were dubbed General Sherman after Union General William Tecumseh Sherman, continuing a practice of naming American tanks after famous Generals. The British name became popular in the US and the two names are often combined into M4 Sherman or shortened to Sherman. | |
 more | Dragon (Plastics) 1/35 German Schwerer Panzerspahwagen Infanteriewagon Kit (6072)
| |
 more | Dragon (Plastics) 1/35 Sd.Kfz. 250/8 NEU 7.5cm KwK37(L/24) 'Stummel' (6102)
| |
 more | Dragon (Plastics) 1/35 Sturmboat c/w Pioneers German WW2 (6108)
| |
 more | Dragon (Plastics) 1/35 British Sherman Firefly VC Tank (6182) The Sherman Firefly Vc, the most powerful British tank of the war. The Sherman Firefly was one of the only British tanks that landed at Normandy that could take on the German Tigers and Panthers. Features newly molded upper hull, lower hull, rearward, turret, engine deck, road wheels, suspension, accessories and more. This model also includes two different track link options, either the standard or winter versions. Each model also includes two newly sculpted British Tank Crewmen. | |
 more | Dragon (Plastics) 1/35 German Sd.Kfz 251/6 Ausf.C Command Vehicle (6206)
This kit is a must for any modeller!
This 1/35 kit of the Sd.Kfz.251/6 Ausf. C Command Vehicle includes a newly tooled aerial frame, new radio compartment layout and a unique 8 meter radio antenna (Kubelmast). This antenna can be built in either the extended or contracted position. This kit also includes photo-etched parts, decals by Cartograf and two newly-tooled radio operators. | |
 more | Dragon (Plastics) 1/35 Sd.Kfz.265 Kleine Panzerbefehlswagon (6218) Panzer 1 Command Tank | |
 more | Dragon (Plastics) 1/35 German WW2 Panzerjager I 4.7cm Pak(t) Tank Kit (6230)
| |
 more | Dragon (Plastics) 1/35 German SdFfz 234/3 Armoured Car Kit (6257)
| |
 more | Dragon (Plastics) 1/35 T34/85 With Bedspring Armour (6266) This kit has received many modifications, the most remarkable of which is the “mattress spring” armor that was added to many T-34 turrets and hulls near the close of the war. This type of armor is often seen on photos of T-34/85s in such combat as the Battle for Berlin.
This protective armor is formed from photo-etched metal parts on the kit. The same material, as well as metal, is also used for many other components (e.g. air-intake louvers). These additions provide a comprehensive upgrade in the level of detail. Modelers are even given the option of assembling a flamethrower version of the tank.more.. | |
 more | Dragon (Plastics) 1/35 German Aufklarungspanzer 38t mit 2cm KWK38 Plastic Tank Kit (6294) Production of the Luchs (Lynx) tracked armored reconnaissance vehicle ended in January 1944 after only 100 were built. Therefore, an alternative was needed by Germany, and the chassis of the Czech-built Pz.Kpfw. 38(t) was selected. The result was the Aufklarungspanzer 38(t), which featured a 2cm KwK 38 gun mounted in a Hängelafette (“swivel mounting”) turret. (Incidentally, this is the same turret as mounted on the Sd.Kfz. 250/9, 251/23 and 234/1). In the end, only fifty of these reconnaissance vehicles were produced. more.. | |
 more | Dragon (Plastics) 1/35 Russian T34/85 1944 Mod Tank Kit (6319) A premium model of the Russian T34 tank | |
 more | Dragon (Plastics) 1/35 American M3A1 half track Kit (6332)
| |
 more | Dragon (Plastics) 1/35 Soviet Su100 Tank Destroyer Premium Edition Kit (6359) The SU-100 31.6-tonne tank destroyer was used extensively in the last year of WWII (and beyond) and was one of the war’s best tank destroyers. Built by UZTM, it was based on the successful SU-85, though it had a more powerful D-10S 100mm gun capable of penetrating 125mm of vertical armor (i.e. any German tank) at a range of 2000 meters. Other improvements to the SU-100 were its thicker frontal armor increased to 75mm, a commander’s workspace in the right-hand sponson, and a cupola for the commander. The SU-100 also had two ventilators installed. | |
 more | Dragon (Plastics) 1/35 German Tiger 1 Late Production with Zimmerit Plastic Kit (6383)
| |
 more | Dragon (Plastics) US Sherman M4A1 DV Tank Kit (6404)
| |
 more | Dragon (Plastics) 1/35 US M55 Quad Gun Trailer Kit (6421)
| |
 more | Dragon (Plastics) 1/35 German Panther D with Zimmerit WW2 Tank Kit (6428)
| |
 more | Dragon (Plastics) 1/35 German WW2 Pz.Kpfw 2 Ausf C Tank Kit (6432)
| |
 more | Dragon (Plastics) 1/35 M4 Sherman Composite Hull (6441)
| |
 more | Dragon (Plastics) 1/35 M4 Sherman 75mm Normandy Tank Kit (6511)
| |
 more | Dragon (Plastics) Allied Assault Monte Cassino 1944 figure set (6515)
| |
 more | Dragon (Plastics) 1/35 Flakpanzer Coelian (9022)
| |
 more | Dragon (Plastics) 1/35 German PzKpfw. 3 Ausf. H Sd. Kfz. 141 Tank WW2 (9029) A finely detailed model kit of the German PzKpfw.III (Panzer 3). The tank is built from dozens of detailed moulded parts, including optional parts for open or closed hatches. Etched brass grilles are included for fine appearance. | |
 more | Dragon (Plastics) 1/35 German Stug 3 Ausf G 75mm Sd.Kfz 142/1 Self Propelled Gun Kit (9035)
| |
 more | Dragon (Plastics) 1/35 Sherman Firefly 1C Hybrid Hull WW2 Tank (9037)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby Russian JS1/2 with Soviet Motor Rifle Troops (9108)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby German 3cm MK 103 Zwilling Flakpanzer IV Kugelblitz & Panzer Crew (9109)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby British Sherman Firefly VC with bonus set Of British Paratroopers WWII (9110)
| |
 more | Dragon (Plastics) 1/35 Cyber-hobby GERMAN Pz.Kpfw.III Ausf.E/F & German Figure Set (9111)
| |