more | Peco OO Re-Railer OO Gauge (SL37)
A simple ramp unit which fits over OO/HO track. Wheel guides moulded into the rampensure that the wheels are placed onto the rails. Long enough for even the largest items of rolling stock the railer is ideal for getting trains onto the track quickly and reliably. | |
more | Peco N Re-Railer N Gauge (SL337)
Easy to use train railing device for N gauge models. Simply fit the railing ramp to a straight section of track, clipping the guide tongue between the rails. Roll trucks and carriages down the ramp and the wheels will be guided correctly onto the rails. | |
more | Pacer Rail Zip Track Cleaner 1oz (PT23)
An advanced technology chemical track cleaner and corrosion inhibitor. Penetrates existing corrosion and helps restore electrical conductivity. Retards rate of corrosion.more.. | |
more | Peco Rail Cleaner/Track Rubber (PL41)
An abrasive rubber block that is absolutely ideal for cleaning dirty or corroded rail surfaces. Great for Scalextric or slot car track too. Helps ensure good electrical contact, particularly if the track is wiped over lightly afterwards with Electrolube or Rail Zip on a soft cloth. | |
more | Hornby Track Cleaning Rubber (R8087)
A fine grit abrasive rubber, ideal for cleaning your track. The angled corners make cleaning of points and crossings easier. | |
more | Hornby OO Track Cleaning Coach (R296)
Track cleaning coach allowing a convenient and realistic means of cleaning the track by means of self adhesive strips on sprung blocks underneath the coach. For best operation the coach should be pushed around the track by an 0-6-0 locomotive, or larger. | |
more | Gaugemaster OO/HO OO/HO Axle Hung Track Cleaning Pads (pack of 3) (GM37)
Axle hung track cleaning wipers. Designed to clip over the axle of an OO/HO-gauge wagon to wipe the track clean as the train moves. An easy method to continuously clean the track as your trains run. | |
more | Gaugemaster N N Axle Hung Track Cleaning Pads (pack of 3) (GM39)
Axle hung track cleaning wipers. Designed to clip over the axle of an N-gauge wagon to wipe the track clean as the train moves. An easy method to continuously clean the track as your trains run. | |
more | Xuron Track Cutter (90028)
The Xuron Track Cutter gives maximum cutting life and optimal finish for cutting railway track. Suiatbel for rail up to code 100.
Length 145mm | |
more | MaGeR Cleaning Fluid (Isopropyl Alcohol) (CF)
Isopropyl Alcohol cleaning fluid for degreasing model railway and slot car track and motor mechanisms. Safe for use on most plastics, but caution should be exercised to avoid unnecessary contact with decorated (painted/decal) surfaces. Suitable for use as a degreasing agent with most mechanisms and electronic equipment. | |
more | Peco Wheel Cleaning Brush + Scraper (New Design) (PL40)
Great for cleaning locomotive driving wheels to ensure efficient running. Simply connect the wires from the brush and Scraper either direct to a 12v DC power supply unit, or to each rail of the track and apply the brush and scraper to the driving wheels, one each side. | |
stock
info | C&L Finescale OO Baseboard Alignment Dowels (C1191)
Metal patternmakers dowels ideal for use on portable layouts to guarantee accurate track alignment every time the boards are put together. These dowels consist of a pair of metal pieces, a dowel and a socket, both with securing screws.
Pack of 2 dowels pairs. | |
more | Dapol OO Track Cleaning / Polishing / Vacuum Car ()
Newly announced for release late in 2008. Price TBA
In association with leading Japanese N gauge manufacturer Tomix, Dapol have announced that they will be producing the OO equivilent of the Tomix N gauge track cleaning car.
All the features of the world beating Tomix car have been incorporated. An abrasive pad removes corrosion and dirt deposits, while a polsihing pad clears up fresh deposits and keeps your track clean. In addition the internal motor runs a vacuum system, collecting loose dirt and grit from your track. On on-board cleaning fluid reservoir allows a plastic-safe cleaning fluid to be stored and dispensed through the cleaning head automatically
The Dapol track cleaner will be equiped with an 8 pin DCC decoder socket, allowing DCC users to have full control over the motor speed at all times. An on/off switch is provided for use with DC control. NEM coupling pockets allow the car to be used with almost any coupling system, including tension lock, knuckle and pocket type couplings. Please note that the motor drives the polishing and vacuum mechanisms inside the car; the car is not self-propelled and will require to be hauled or pushed by a locomotive. | |
Antics
Search
Index
Checkout
Back