Slec Engine Mount And Screws .049 (SL06D)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
more...
Stock:
Available from shops: Cardiff: 5(
explain )
(Prod Ref #50821)
Radio Active Engine Mount 10-15 (RAA1077/10)
signed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
more...
Stock:
Available from shops: Cardiff: 4(
explain )
(Prod Ref #49719)
Radio Active Engine Mount 19-30 (RAA1077)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
more...
Stock:
Available from shops: Cardiff: 2, Coventry: 2, Gloucester: 5, Plymouth: 3(
explain )
(Prod Ref #33171)
Radio Active Engine Mount 30-45 (RAA1078)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
more...
Stock:
Website: 6 Available from shops: Cardiff: 9+, Coventry: 1, Gloucester: 6(
explain )
(Prod Ref #46161)
Radio Active Engine Mount 30-45 Long (LRAA1505)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
more...
Stock:
Available from shops: Cardiff: 2(
explain )
(Prod Ref #54514)
Radio Active Engine Mount 60-90 Long (LRAA1515)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
more...
Stock:
Available from shops: Cardiff: 2, Gloucester: 2(
explain )
(Prod Ref #54519)
Slec 3mm x 25mm Nut/Bolts Pack 6 (SL043F)
Steel nuts & bolts are iideal for securing hardware on to a variety of models. When mounting items in high vibration areas make sure to use a liquid threadlock to secure the nut in place.
more...
Stock:
Available from shops: Bristol: 9+, Plymouth: 9+(
explain )
(Prod Ref #56205)
Slec 4mm x 25mm Nut/Bolt/Washer Pk 6 (SL043G)
Steel nuts & bolts are iideal for securing hardware on to a variety of models. When mounting items in high vibration areas make sure to use a liquid threadlock to secure the nut in place.
more...
Stock:
Available from shops: Bristol: 4, Plymouth: 9+(
explain )
(Prod Ref #57173)
Ripmax External Charge Holder (PR4ECH)
This nifty little number allows you to charge your receiver battery pack from the outside of the aircraft. Simply fit the External Charge Holder to the side of the fuselage, with the charge flylead from the switch harness mounted in the holder. This way you can just plug the charger lead into the side of the model to top up for your next day of flying.
more...
Stock:
Website: 1 Available from shops: Bristol: 6, Cardiff: 5, Coventry: 1, Gloucester: 2(
explain )
(Prod Ref #32673)
Radio Active Servo Mounting Bracket c/w Screws (RCA190)
Radio Active's servo mount bracket converts just about any servo from beam to side wall fixing. Neat, light and very practical.
more...
Stock:
Website: 3 Available from shops: Cardiff: 6(
explain )
(Prod Ref #39147)
Radio Active Wing Servo Mounting Set (Pk2) (RCA210)
Radio Active's servo mount bracket converts just about any servo from beam to side wall fixing. Neat, light and very practical.
more...
Stock:
Website: 2 (
explain )
(Prod Ref #39178)
Perkins Wing Servo Mount Micro (5508013)
more...
Stock:
Website: 3 Available from shops: Bristol: 2(
explain )
(Prod Ref #36383)
Radio Active Armour Guard RX Packing (FRAA1065)
No installation is complete without plenty of foam packing around the receiver and battery. With the tubular packing, simply cut off the length you require and insert your receiver or battery. Couldn't be simpler, or safer.
more...
Stock:
Website: 1 Available from shops: Gloucester: 9+, Stroud: 1(
explain )
(Prod Ref #56676)
Perkins Receiver Strongbox (7720980)
more...
Stock:
Available from shops: Bristol: 1, Cardiff: 2(
explain )
(Prod Ref #32822)
Slec Servo Screws And Washers (SL009)
more...
Stock:
Available from shops: Cardiff: 3, Coventry: 1(
explain )
(Prod Ref #34816)
Ripmax Tie Straps 4" Fl. Yellow Pk 20 (IP220FY)
more...
Stock:
Available from shops: Cardiff: 1, Stroud: 9+(
explain )
(Prod Ref #27550)
Ripmax Hook & Loop 1" x 6 (TIP210B)
more...
Stock:
Available from shops: Bristol: 9+(
explain )
(Prod Ref #27551)
Ripmax Servo Tape 1.5" x 18" (A1020)
For simple servo installation, there's nothing as quick as servo tape. With its shock absorbing qualities it can also reduce damage to radio equipment through vibration. Ultra-sticky, it's designed to stay put!
more...
Stock:
Available from shops: Bristol: 2, Cardiff: 4, Gloucester: 4(
explain )
(Prod Ref #5116)
Radio Active Wing Seating Tape 12mm (RAA1063)
Close any gaps between the wing and fuselage to form an almost air-tight seal. Also stops the fuselage chaffing on the wing and protects its finish. Available in a variety of widths and lengths to suit the model you're building.
more...
Stock:
Available from shops: Bristol: 7(
explain )
(Prod Ref #2419)
Ripmax Wing Joining Kit (SP1140)
Supplied as a pack containing enough SP113 resin and hardener, plus a length of fibreglass bandage, to reinforce one wing centre section. No waste!
more...
Stock:
Available from shops: Gloucester: 1, Stroud: 2(
explain )
(Prod Ref #7454)
Slec White Rubber Bands 3" (24) (SL44)
White, non-perishable rubber bands are ideal for securing wings and tailplanes onto radio controlled aircraft.
more...
Stock:
Available from shops: Bristol: 2(
explain )
(Prod Ref #30515)
Slec White Rubber Bands 4" (12) (SL44A)
White, non-perishable rubber bands are ideal for securing wings and tailplanes onto radio controlled aircraft.
more...
Stock:
Available from shops: Bristol: 2(
explain )
(Prod Ref #4375)
Slec White Rubber Bands 5" (10) (SL44B)
White, non-perishable rubber bands are ideal for securing wings and tailplanes onto radio controlled aircraft.
more...
Stock:
Available from shops: Bristol: 5(
explain )
(Prod Ref #4368)
Slec White Rubber Bands 6" (5) (SL44C)
White, non-perishable rubber bands are ideal for securing wings and tailplanes onto radio controlled aircraft.
more...
Stock:
Available from shops: Cardiff: 2(
explain )
(Prod Ref #4374)
Slec 4 x 8" White Rubber Bands (SL44E)
White, non-perishable rubber bands are ideal for securing wings and tailplanes onto radio controlled aircraft.
more...
Stock:
Website: 9+ Available from shops: Bristol: 1(
explain )
(Prod Ref #7653)
Radio Active Wing Fix Bolts & T Nuts (Pk 2) (RAA1074)
These nylon bolts are specifically designed to shatter on hard impact, saving the wing in the process. The castle nuts provided stay in situ by digging into the wood surround.
more...
Stock:
Available from shops: Bristol: 1, Cardiff: 6, Gloucester: 1(
explain )
(Prod Ref #32973)
Radio Active M4 Wing Bolt with Nut x2 (RAA1091)
Cheese head bolts moulded in nylon for quick break in case of impact. Supplied with blind nuts that embed into wooden fuselage or firewall.
more...
Stock:
Available from shops: Bristol: 6, Cardiff: 2, Coventry: 1, Gloucester: 4, Plymouth: 4(
explain )
(Prod Ref #31553)
Radio Active Mini Skid with Screws (RAA1350)
Avoid nasty wing tip 'scuffing' by fitting these small, tough nylon skids. You'll hardly notice they're there but they'll certainly save your paint finish. The lightweight tail skid shown above right is ideal for those who don't want the weight of a tail wheel but need to keep the rudder out of the grass.
more...
Stock:
Available from shops: Bristol: 1(
explain )
(Prod Ref #31551)
Irvine Stick On Lead Weights (IRVSL02)
These lead weights are invaluable in ballancing your aircraft. With a sticky backing for mounting, these lead weights are supplied segmented in 1/2oz portions, so you can work out exactly what's going on with the model. No more moving tanks & batteries to find the C of G.
more...
Stock:
Website: 3 Available from shops: Bristol: 4, Cardiff: 7(
explain )
(Prod Ref #30045)
Perkins 1/9 Jet Pilot Figure Unpainted (5508330)
more...
Stock:
Available from shops: Cardiff: 1(
explain )
(Prod Ref #57553)
Perkins 1/10 Pilot British WWII 1/10 Scale (5508340)
more...
Stock:
Available from shops: Cardiff: 1(
explain )
(Prod Ref #47588)
Perkins 1/8 Pilot British WWII 1/8 Scale (5508369)
more...
Stock:
Available from shops: Gloucester: 1(
explain )
(Prod Ref #46758)
Perkins 1/8 Pilot Civilian 1/8 Scale (5508367)
more...
Stock:
Available from shops: Cardiff: 1(
explain )
(Prod Ref #46332)
Ripmax Canopy Latch Sprung (RMX010)
This inconspicuous and lightweight, yet very durable canopy latch system is a must for every building bench. Each pack contains 2 sprung and 2 solid fixing points. Secure with glue.
more...
Stock:
Available from shops: Cardiff: 3(
explain )
(Prod Ref #49949)
stock
Radio Active Engine Mount 60 Size (RM1)
more...
Stock:
Website: 1 Available from shops: Gloucester: 2, Sheffield: 1(
explain )
(Prod Ref #32686)
