Lenz 11100 LS100 Switch Module 4 Points/Signals Feedback
Lenz LS100 Switch Module 4 Points/Signals Feedback 11100
Lenz 11100 LS100 Accessory decoder for 4 turnouts with feedback.
Accessory decoders are the link between your NMRA DCC system and your functional devices (that is turnouts, signals, uncouplers, etc.) on your model train layout.
Accessory decoders receive commands sent from the command station via the power station and activate the drives of turnouts or other switching devices. For DIGITAL plus systems these switching commands are activated from input devices, such as, hand held controller LH100 or LH90 (or in connection with another, compatible digital system).
Dimensions: approximately 3.5 x 3.5” (90 x 90 mm)
3 Amp Maximum 16 v AC Power input needed.
Up to 4 function devices each with a twin output can be connected to each LS100/LS110. Power for these function devices can by supplied by the track power or through an external power supply. Each function device output can have its characteristics individually set (by programming). In this way you can program each output with a variable pulse duration, a variable flashing operation or to a constant operation,. This allows the direct connection of lightbulbs or LEDs without additional relays. The LS100 also has a connection for the feedback bus of the DIGITAL plus system. If the feedback bus is connected, then the position of turnouts can be sent back to the system when using suitable turnout drives. It is then possible to display a turnout being thrown by either DCC or by hand.