Electronics & Automation

Electronic train lighting and automatic train control units
A useful box pack containing a motor and gearbox assembly with a 9 piece gear set, control switch and wiring, steel wire and brass tube.
This set of components can be used for a multitude of purposes providing movement and animation to otherwise static features. The card wrapper provides a step-by-step guide to building the unit as a slow-action point motor as one suggestion and a useful assembly primer.

Ideal for operating items such as points, semaphore signals, water mills and level crossing gates in slow motion on Model Railways - or anything else your imagination and ingenuity allows. A great introduction to creating electro mechanical models!
£9.95
Warehouse: 1
Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 90196)
Cookies are disabled.
To place an order please call 01453 377030

A time controlled unit which can be used with any controller and stops a locomotive at a point on a line, reverses it and then stops it again at a second point, reversing the locomotive again. This repeats indefinitely. The duration of each sequence can be adjusted from approx 20-70 seconds.
Input: 16v A.C. at a maximum of 1.25 amps Requires T1, M1 Transformer
Measurements: 109mm x 68mm x 20mm

£36.95

Must be ordered - delivery as soon as possible.
(Product Ref 42012)
Cookies are disabled.
To place an order please call 01453 377030

A small unit providing an automatic stop and start facility which only requires one reed switch to be installed.
The locomotive decelerates for about 5 seconds after passing factory set. The time stopped can be adjusted from approx 20-70 seconds, the rate of deceleration is also adjustable.
Reed switch and magnet are included.
Input: 16v A.C. at a maximum of 1.25 amps Requires T1, M1 Transformer
Measurements: 109mm x 68mm x 20mm

£41.95

Must be ordered - delivery as soon as possible.
(Product Ref 45362)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster Model 100 - Panel Mounted Single Track Controller 100
Single Track Panel Mount Controller for small gauges up to ˜OO. Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 transformer. Output: 1 x 12v D.C. at 1 amp controlled
Measurements: Panel: 70mm x 105mm x 28mm deep
Aperture: 43mm x 83mm x 25mm deep.
£50.00

Must be ordered - delivery as soon as possible.
(Product Ref 24099)
Cookies are disabled.
To place an order please call 01453 377030

Four track panel mounted controller suitable for N, OO and most small gauges
Input: 4 x 16v A.C. at 1.25 amps each Requires 2x T1 or 2x M1 Transformer
Output: 4 x 12v D.C. at 1 amp each controlled
Measurements: Panel: 217mm x 105mm x 28mm deep
Aperture: 84mm x 190mm x 25mm deep

£94.95
MRP £110.00

Must be ordered - delivery as soon as possible.
(Product Ref 38382)
Cookies are disabled.
To place an order please call 01453 377030

Power controller designed specifically for use with large gauge models including gauge 1, G scale and LGB.

Output up to 20 volts DC

£120.00
MRP £140.00

Must be ordered - delivery as soon as possible.
(Product Ref 46809)
Cookies are disabled.
To place an order please call 01453 377030
Have a question? Contact us
Wiring for layouts and electrical components can be found in the electrical section of our tools and hardware range.

Please note that these automation and high-frequency accessories are designed for use with DC control systems only. These devices are not for use with DCC systems.