Contact Mail Order Hotline on 01453 825 381 or email enquiries@antics.ltd.uk
0 Items
Subtotal: $0.00
checkout
> Power & Electrics > Digital Command Control (DCC) > DCC Power & Expansion

More info

E-Z Command E-Z Command Companion DCC Controller 36-510

The Bachmann EZ-Command Companion is an extra controller which can be connected to the 36-500 EZ-Command (required) to provide a second controller that duplicates the control functionality of the master unit. The companion can select from any of the locomotives on the layout and take control of direction, speed and functions. The companion allows a second operator to select and run a train on the layout, or to keep two trains under control using the two separate speed control knobs.

Why not make model railways a family activity with a second control unit?
 
This is an add-on for the Bachmann EZ-Command controller 36-500 which is required for use of the companion.


Read more...
Stock:
Pre-Order (Website:0)(explain)
(Prod Ref #52954)
MRP: $119.93
Antics Price: $108.00


More info

Bachmann Dynamis Pro Upgrade 36-508

An upgrade for the Dynamis controller 36-505 (Required) unleasing the full potential of the Dynamis system with functionality comparable with the most powerful DCC systems currently available.

The Dynamis system has been designed on a modular basis from the outset, allowing new modules to be developed and added easily. The Dynamis Pro upgrade is supplied complete with an expander module, allowing up to 5 IR modules to be connected, plus one additional IR module and extension cable. The pro box is designed to fit beneath the Command Centre in a stack, communicating through the multi-way connector underneath the command centre box.
Upgrading to Dynamis Pro allows the attachment of up to 5 IR sensors, eliminating range and line-of-sight issues on even the largest layouts, plus allowing for up to four Dynamis handsets (36-507) to be registered, giving additional operators full access to your layout.

That's not all the Pro box does! It is equiped with the ECoSLink high speed data bus interface and has a programming track output. By careful system design the programming track can even be incorporated into your layout and used as a regular section of track in normal service.

Don't forget that the registered locomotive data is held in the handset, making it easy for you to take your handset and engines to run on another Dynamis controlled layout.

Please note that this is an upgrade for the Dynamis system which must be added to the base Dynamis unit 36-505.


Read more...
Stock:
Website: 2
Available from shops: Bristol: 1(explain)
(Prod Ref #64308)
MRP: $288.15
Antics Price: $225.00


More info

Bachmann Dynamis Wireless Handset 36-507

Exploit the full potential of Dynamis Pro with extra handsets allowing several operators to run trains on the layout. A total of four Dynamis handsets can be used with the Dynamis Pro.

A Dynamis Pro system is required to allow use of extra handsets, this requires a Dynamis unit, 36-505 and Pro Upgrade 36-508.

Dynamis DCC website with full product details and answers to your Dynamis questions.


Read more...
Stock:
Website: 2(explain)
(Prod Ref #63769)
MRP: $113.18
Antics Price: $105.00


More info

Bachmann Dynamis Wireless Receiver 36-509

Additional Infra-Red wireless connection transceiver for Dynamis Pro system. Eliminate dead spots and hidden corners to ensure your Dynamis handsets can communicate from anywhere in the room.

A Dynamis Pro system is required to allow use of additional receivers, this requires a Dynamis unit, 36-505 and Pro Upgrade 36-508.

Dynamis DCC website with full product details and answers to your Dynamis questions.


Read more...
Stock:
Website: 1(explain)
(Prod Ref #63770)
MRP: $34.05
Antics Price: $30.00


More info

Hornby RailMaster PC to DCC Model Railway Control System R8144

With Hornby RailMaster connected, the power of the Elite can be harnessed like never before. Hornby RailMaster is a totally new way to control a model railway.

Just connect the Elite via the USB port to a PC or laptop and the power of Hornby RailMaster is at your fingertips!

More information available from Hornby Hobbies on the RailMaster PC to DCC interface software.

Requires Hornby Elite DCC control unit, PC computer with Windows 95/98/2000/NT/XP/Vista or 7, USB communications port.


Read more...
Stock:
Website: 1
Available from shops: Gloucester: 1(explain)
(Prod Ref #4004)
Price: $98.25


More info

Lenz LH90 Walkabout Controller 21090

The LH90 enables users of the older Set 01 or set 02 to have a very easy-to-use Hand Controller that will give 4-figure addressing capability. It is also a good add-on to a Set 100 and gives instant loco control that is instantly recognised by users of conventional controllers. It can of course be added to a Set 90 as an extra controller
Read more...
Stock:
Website: 1(explain)
(Prod Ref #45297)
MRP: $161.85
Antics Price: $150.00


More info

Lenz LH100 Walkabout Controller 21100

The LH100 keypad based throttle is a universal input device for all DIGITAL plus system and is compatible with all Xpress Net.based systems. You can control your motive power, program ? locomotive and accessory decoders, throw turnouts activate uncoupling ramps or set signals, determine and program the system properties, or check the status of feedback encoders and accessory decoders with feedback?  An easy to read LCD display provides an easy to read indication of both the locomotive you are operating as well as the current speed and function status.

Remember! Antics Price includes mainland UK delivery!


Read more...
Stock:
Pre-Order (Website:0)(explain)
(Prod Ref #45302)
MRP: $242.92
Antics Price: $225.00


More info

Gaugemaster Prodigy Advance Walkaround Handset DCC12

Additional handset for the Gaugemaster Prodigy system.

We often have the cable-tethered handset in stock, a wireless version is also available to order. Please contact us for details. email enquiries@antics.ltd.uk or telephone 01453 825381.


Read more...
Stock:
Website: 1(explain)
(Prod Ref #75553)
Price: $187.43


More info

E-Z Command E-Z Command 5 Amp DCC Power Booster 36-520

Bachmann's E-Z Command power booster is an in-line unit that can be used with any NMRA standard DCC system. It connects to the track output of a control unit to provide 5 amps of DCC power for larger layouts, larger scales or an increased number of locomotives. Also suitable for Dynamis systems.


Read more...
Stock:
Pre-Order (Website:0)(explain)
(Prod Ref #52955)
MRP: $337.42
Antics Price: $299.99


More info

Lenz TR100 Transformer 15v. 3amp. 45VA. 26000

A 45VA insulated transformer capable of an output of 3 amps. Ideal for powering the Lenz Compact, LH90 and LH100 control units on smaller layouts.

Fitted with UK plug


Read more...
Stock:
Website: 1(explain)
(Prod Ref #45308)
MRP: $71.25
Antics Price: $67.50


More info

Lenz Transformer TR150 15V. 4.6amp. 70VA. 26150

A 70VA insulated power transformer with an output of 15 volts and a maximum of 4.6amps.

This unit is recommened for use with the Lenz LH90 and LH100 control systems when used on larger layout operating multiple locomtoives.

This transformer should also be selected for use with the Lenz LV102 power amplifier/booster to ensure that the amplifiers full rated current can be supplied.

Fitted with UK plug


Read more...
(Prod Ref #45309)
MRP: $96.98
Antics Price: $90.00


More info

E-Z Command Digital Connector Panel 36-515

A connector panel to enable many E-Z Command compatible accessories to be connected to the E-Z Command system.


Read more...
Stock:
Website: 2(explain)
(Prod Ref #52953)
Price: $44.92


More info

Hornby RJ12 Leads R8236

RJ12 plug connection leads to connect Elite, Select and Walkabout units.
Read more...
Stock:
Website: 5(explain)
(Prod Ref #63061)
Price: $11.98

stock
info

Hornby RJ12 4 Wire 3m Lead R8266


Read more...
Stock:
Website: 1(explain)
(Prod Ref #75653)
Price: $11.25

stock
info

Gaugemaster Plug for DCC01 + 2 DCC60


Read more...
Stock:
Pre-Order (Website:0)(explain)
(Prod Ref #78938)
Price: $4.88


More info

Lenz LA152 XBUS Adaptor with Faceplate 80152

The LA152 provides an easy method to install XpressNET ports in convenient locations anywhere on your layout.


Read more...
Stock:
Website: 1(explain)
(Prod Ref #47066)
Price: $30.38

> Power & Electrics > Digital Command Control (DCC) > DCC Power & Expansion
 
Antics on-line with model shops in: Stroud (HQ), Bristol, Cardiff, Gloucester, Sheffield, Plymouth, Worcester and Coventry.
We stock a full range which includes plastic kits, radio control cars, diecast models, railways, planes and boats etc.
Click on the links under "Available to buy now" or any picture in order to start shopping. Offers subject to availability. E&OE.
Jatech Limited