Gaugemaster Seep Magnetic Tension Lock Uncoupler (TLU)
The electromagnet coil pushes the long pin up to raise the uncoupler ramp used with tension lock couplings. This unit can be mounted beneath the baseboard, with only a hole suitable for the activator pin needing to be drilled through to the uncoupler ramp above.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #53961)
Hornby Two Way Lever Switch On-On Yellow for Signals (R046)
Used to transfer power from one circuit to another, eg. colour light signals.
more...
Stock:
Website: 5 Available from shops: Bristol: 2, Cardiff: 2, Coventry: 1, Gloucester: 2, Plymouth: 1, Sheffield: 1, Stroud: 2, Worcester: 2(
explain )
(Prod Ref #503)
Hornby Lever Switch On/Off for Lights etc (R047)
For switching power on & off
more...
Stock:
Website: 6 Available from shops: Cardiff: 2, Coventry: 1, Gloucester: 2, Plymouth: 1, Sheffield: 2, Stroud: 1(
explain )
(Prod Ref #504)
Peco Switch - Single Pole On - Off (PL-22)
Use this switch for controlling isolated? sections of track such as those found in locomotive depots, bay platforms, etc, or to operate lights and motorised scenic accessories.
more...
Stock:
Available from shops: Bristol: 6, Cardiff: 1, Gloucester: 3, Sheffield: 5(
explain )
(Prod Ref #31758)
Peco Changeover Switch - Single Pole On-On (PL-23)
Use this switch to control colour light signalling or use two ganged together as a polarity reversing switch to control reverse loops, turntables etc.
more...
Stock:
Available from shops: Bristol: 1, Gloucester: 5, Sheffield: 4, Stroud: 6, Worcester: 4(
explain )
(Prod Ref #31759)
Peco OO Track Isolating Switch On-Off (PL-20)
Simple to clip onto Streamline track in conjunction with an isolating rail joiner to provide simple isolation of track sections, or can be used as an on-off switch on control panels. In plastic case. Easy action.
more...
Stock:
Website: 4 Available from shops: Bristol: 3, Cardiff: 1, Gloucester: 9, Sheffield: 7, Stroud: 9+(
explain )
(Prod Ref #31756)
stock
Expo Turntable Motorising Kit (262-11)
Using a clearbox gearbox this motor and gearbox drive unit has been designed for motorising model railway turntables. The easily dismanteled and re-assembled gearbox allows the gear ratio to be altered, providing a steady state speed from 625rpm down to 2.6rpm, with actual speed variation achievable using a speed controller eg. using the train controller switched to supply the turntable motor.more...
Stock:
Available from shops: Bristol: 2(
explain )
(Prod Ref #88382)
DCC Concepts Rolling Road Active Set for N, OO/HO, TT/HOm and EM/P4 (DCP101)
The DCC Concepts multi-gauge rolling road offers the ability to test model locomotives for several track gauges. This is an ideal combination for railway modellers who operate models in several different scales, or models of both standard and narrow gauge trains.
Six roller units are supplied, carefully designed to sit on and take power from a section of track. The provision of six roller units allows locomotives with up to six driven axles to be tested. That covers all Co-Co diesel locomotives and up to 12-coupled steam locomotives! The rollers are separate units connected by a section of insulated channel section, cut to the correct length to maintain gauge. Thus the insulated sections can easily be changed for the alternative lengths, allowing 9mm (N, HOe and 009), 12mm (TT, HOm, HO3-1/2, OOn3), EM and P4 gauge models to be accomdated.
The DCC Concepts rolling roal is possibly the best and most flexible choice for railway modellers who own and operate models of different scales and gauges.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #85009)
Hornby OO Track Link Wire Pack (R8201)
Link wire for connecting two tracks together. Ideal for conversion to DCC.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #36562)
