Lithium Polymer batteries are significantly more volatile than the alkaline, Ni-Cd or Ni-MH batteries used in RC applications. All instructions and warnings must be followed exactly. Mishandling of Li-Po batteries can result in fire. To help ensure a safe charge every time, you MUST read the following safety instructions and warnings before handling, charging or using a Li-Po battery pack. You must charge Li-Po battery packs in a safe area away from flammable materials. Do not charge the battery when installed in a model or device. Never charge the battery unattended. When charging the battery you should always remain in constant observation to monitor the charging process and react to potential problems that may occur. After use, the battery must be cooled to ambient temperature before charging. You MUST use a Li-Po Balance Charger ONLY. DO NOT use a Ni-Cd or Ni-MH charger. If at any time during the charge or discharge process the battery begins to balloon or swell, discontinue charging or discharging immediately. Quickly and safely disconnect the battery, then place it in a safe, open area away from flammable materials to observe it for at least 15 minutes. Continuing to charge or discharge a battery that has begun to balloon or swell can result in a fire. A battery that has ballooned or swollen even a small amount must be removed from service completely. In the event of a crash, you must quickly and safely disconnect and remove the battery from the model, then place it in a safe, open area away from flammable materials to observe it for at least 15 minutes. Store the battery at room temperature for best results. Do not over-discharge the battery. Discharging the battery too low can cause damage to the pack resulting in reduced performance and duration.
If you have any further questions or concerns regarding the handling, charging and/or use of Li-Po battery packs, please contact Antics for further information.
Fusion Typhoon L50B Pro Battery Charger with Balancer (FS-L50BP)
The 2 line, 16 character, blue backlit, LCD makes the screen extremely clear and legible. with a Built in intelligent balancing circuit is designed to individually balance each cell on the connected lithium battery pack within the tolerance of 5mV during charge or discharge. A balancing plug adaptor boards are supplied to suit Polyquest, FlightPower and Thunder Power batteries. Optional adaptors for JST XH are available. Voltage monitoring feature shows each actual cell voltage on the screen during balancing. Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #73863)
Fusion Tornado BL ESC Programmer (FS-TBLPROG)
The Tornado Programmer is very easy to use, with the outer arrows being used to move up and down the programming modes, which you then select by pressing both outer arrows at once.The INC + and DEC buttons are then used to select or change the settings within the programming modes. The programmer allows you to programme and set the following parameters:
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #73867)
Perkins Twister 3 Cell Li-Po Charger 11.1v 0.8amp (6600320)
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #37982)
Perkins Li-Poly 1-3 cell 250ma-2amp charger 12v (5509989)
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #50371)
stock
Tamco B3AC 2/3 Cell LiPo Balance Charger (TAC001)
more...
Stock:
Website: 9+ Available from shops: Bristol: 2, Cardiff: 3, Coventry: 2, Gloucester: 2, Plymouth: 2, Sheffield: 2, Stroud: 1, Worcester: 1(
explain )
(Prod Ref #4925)
Etronix Pocket Plus 2-4 Cell Lipo Charger (ET0218)
Portable pocket sized adjustable balance charger for 2-4S LiPo batteries.Powerpal Pocket Plus Spec Check:
Operating Voltage Range: DC11.0 - 18.0 Volt AC to DC adaptor: DC11.0 - 18.0V/3A (not supplied) Li-Ion/Polymer cell range: 1-4 cells Current drain for balancing LiPo cells: 300 mAh/cell Charge Current Range: 0.5-4.0A (Max 35w power) Weight: 180g Dimensions: 100x61x33mm
more...
Stock:
Available from shops: Bristol: 1(
explain )
(Prod Ref #73690)
stock
Ripmax Pro Peak Quattro Charger (IP2750)
This microprocessor controlled constant current charger automatically selects charge current, and is suitable for charging 1-4 Li-Po cells in series. Charge packs with confidence.
more...
Stock:
Available from shops: Bristol: 1, Gloucester: 1(
explain )
(Prod Ref #80551)
stock
Top Gun Li-po Balance Charger 2-3 Cells Input 10-15v (TGP0516)
more...
Stock:
Available from shops: Bristol: 1(
explain )
(Prod Ref #81583)
Ansmann Ansmann Racing Xbase 2.0 (151100003)
The xBase 2.0 has an AUTO feature that automatically controls the supply current when charging or discharging accumulators. This prevents overcharging, which can damage batteries. The integrated voltage regulator for lithium batteries controls the voltage for each individual cell in a battery pack. This makes having a separate charger for cell voltage control in lithium batteries (Li-Ion, LiPo and Li-Fe) unnecessary. xBase 2.0 can monitor and control the voltage of each of the individual lithium battery cells while discharging. As soon as the voltage in any of the cells exhibits unusual fluctuation the charging process is interrupted and an error message appears. You can charge lithium batteries for specific uses. FAST charging mode reduces charging time, STORAGE mode regulates the target voltage of the battery, enabling you to store the battery for longer periods. Automatic charge interruption works according to the delta peak voltage detection principle (NiCd and NiMH batteries). You can perform up to five charge/ discharge cycles or discharge/charge cycles to refresh and balance batteries.
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #90451)
Ansmann Ansmann Racing Xmove Deluxe (153000040)
nbsp; Optimised operating software: The xMove 2.0 Deluxe has an AUTO feature that automatically controls the supply current when charging or discharging rechargeable batteries. For lithium batteries in particular, this prevents overcharging, which can damage batteries. High voltage and high current circuit: The xMove 2.0 Deluxe is designed for a maximum output of 150W. This allows the device to charge or discharge up to 27 NiCd or NiMH cells and eight series lithium batteries with a maximum current of 7.0A. This high performanceis made possible by the special cooling system that can easily handle the current required
more...
Stock:
Available Soon (Website:0)(
explain )
(Prod Ref #90450)
Ansmann Ansmann Racing Xmove Ultimate 2.0 (153000050)
The xMove 2.0 Ultimate features a modern charge time calculator and a timeless design. Suitable for all common types of rechargeable batteries in model construction (LiPo, Li-Ion, Li-Fe, NiMH, NiCd and Pb). Simple, efficient user interface for easy use. Effective features and detailed information. Real-time display showing battery voltage, charging current, battery pack temperature, charging/discharging capacity, elapsed time, input voltage, etc. lets you view the current status and set up safety parameters. The voltage regulator for individual cells in a battery pack allows you to balance the pack during charging/discharging. The device can monitor and balance each individual cell during charging/discharging (tolerance: +0.01 V). Various operating modes for different requirements: automatic charging, balancing, fast charging, storage, cyclic charging, etc. The device can store and access up to five different sets of data for a variety of different battery types. These data sets are saved in the program settings, giving you direct access to the corresponding information for charging or discharging a specific type of battery. You can access this information and perform the charging/discharging process whenever you like without having to re-enter the corresponding program settings again every time. You can perform up to five charge/discharge cycles or discharge/charge cycles to refresh and balance NiMH or NiCd batteries.
more...
Stock:
Available Soon (Website:0)(
explain )
(Prod Ref #90448)
Ansmann Ansmann Racing Xmove Evolution 2.0 (153000070)
Elegant, attractive design paired with touch controls and a piano finish are just a few of the visual highlights this charger has to offer. The white two-line display shows users all the relevant data and defines parameters before, during and after charges. This dual device allows you to charge two packs with up to six LiPo/Li-Fe or 18 NiMh/NiCd cells simultaneously, all with a charge current of 0.1 to 10A per output. Hot keys make it easy to switch between the two charge outputs. The corresponding balancers work with an equalising current of 300mA. The integrated model memory and USB interface combine the advantage of complex battery management systems with the simplest possible approach. The designers focused on quiet, effective fans to create a device that is as universal as possible, making the xMove 2.0 Evo ideal for every type of use: whether in the office, at home or in the workshop. Professional airplane, helicopter, boat and car modelling demands high-performance equipment and the xMove 2.0 Evo is perfect for these applications.
more...
Stock:
Available Soon (Website:0)(
explain )
(Prod Ref #90445)
Etronix Power Pal Dc Li-ion/Polymer Balance Charger (F54)
Microprocessor controlled hogh performance charger/discharger/cycler for NiCd/Nimh/Lithium/Pb batteries with an integrated cell voltage balancer. Input power; 12v D.C.,integrated Lithium battery balancer
more...
Stock:
Available to Order (Website:0)(
explain )
(Prod Ref #78887)
