more | Tamiya 1/35 British 6 Pound Gun WW2 Ltd Re Release (35005)
| |
more | Tamiya 1/35 German Panzer Kampfwagon 2 Ausf. F/G WW2 (35009)
In the morning of Sept.1st 1939 German forces invaded Poland. The Pzkpfw ll played a key role in this Blitzkreig which started with the invasion of Poland and ended with the surrender of France.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German B.M.W R75 With Sidecar WW2 Plastic Kit (35016)
BMW's motorcycle and sidecar had a maximum speed of 95km/h. Carrying a MG34 machine gun or even a trench mortar on its sidecar. It was also used by the Waffen SS who guarded Hitler. A large number were also employed by the Afrika Corp.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German 88mm Gun, Flak 36/37, inc 9 Figures - WW2 (35017)
Justifiably feared among enemy tank and aircraft crews, the 88mm gun was a formidable weapon that could penetrate the thickest armour at ranges their opponents could only dream of. The third model had a divided monobloc barrel. This was the gun that formed the armament of the Royal Tiger, Elephant Panzerjager and Jag Panther.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 Hanomag Sdkfz 251/1 German Halftrack Model (35020)
The armoured personnel carrier came in 22 variations from having shielded machine guns to being armed with a 75mm AT gun . Total production reached about 16000 by the end of the second world war.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 Sand Bags (35025)
Sand bag set ideal for dioramas
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 Jerry Can Set (35026)
Jerry can and oil drum set
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 Barricades Set (35027)
| |
more | Tamiya 1/35 Brick Wall Set (35028)
| |
more | Tamiya 1/35 German 3.7cm Anti-Tank Gun PAK3 5/36 WW2 (35035)
In Operation Barbarossa, started in 1941, the 3.7cm gun wasn't able to penetrate the strong armour of the Russian tanks and got the dishonourable nickname of Door Knocker, although it was used with lethal effect against soft skinned vehicles.
Requires polystyrene cement to build the model, suggested basic colours German grey, field grey, flesh and matt black | |
more | Tamiya 1/35 US M113 Amoured Personnel Carrier Plastic Kit (35040)
| |
more | Tamiya 1/35 US Amphibean Ford GPA plastic kit (35043)
| |
more | Tamiya 1/35 British Quad Gun Tractor (35045)
The CMP Quads including the FAT-2 Quad gun tractor were very good vehicles and simple to operate. They continued on active service in the British Commonwealth forces for about 15-20 years even after the war. more.. | |
more | Tamiya 1/35 German 75mm Anti tank Gun WW2 (35047)
With an armour piercing projectile the 7.5cm gun was able to penetrate a 130mm armour plate at an approx distance of 1000 metres, the maximum rate of fire was 14 rounds per minute
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 US M41 Walker Bulldog Tank Plastic Tank Kit (35055)
| |
more | Tamiya 1/35 British Chieftain Mk5 Modern Tank Kit (35068)
| |
more | Tamiya 1/35 Russian SU-85 Tank Destroyer - WW2 (35072)
Mounting an 85mm modified Anti-tank weapon on a T34 chassis the SU-85 was intended to counter the early German heavy tanks encountered by the Russians at the beginning of the Soviet-German conflict of WW2. | |
more | Tamiya 1/35 German Sturmpanzer IV Brummbar Sdkfz.166 WW2 (35077)
In street fighting and close assault role the Sturmpanzer lV was highly successful, being difficult to penetrate except by the most powerful anti tank weapons. It lived up to its name of Brummbar ' Grizzly bear' which was given to it in 1943.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 Italian Semovente M40-75/18 (35078)
| |
more | Tamiya 1/35 US Multiple Gun Carraige M16 WW2 Kit (35081)
The multiple gun motor carriage M16 is reincarnated as an elaborate plastic model. First deployed during the end of WWII and then in the Korean War, the quadruple AA machine gun mount was called "Meat Chopper" because of its impressive firepower. This kit authentically replicates this formidable weapons system with its characteristic suspension, axles, and more. Rivets on the body surface and the winch at front are also reproduced with the utmost detail. 3 figures looking up add a sense of urgency to the scene. more.. | |
more | Tamiya 1/35 British Army Ambulance Kit from the 80's (35082)
Ltd Re Release | |
more | Tamiya 1/35 German Sturmgeshutz IV Self Propelled Gun Kit WW2 (35087)
| |
more | Tamiya 1/35 German 2cm Flakvierling 38 WW2 (35091)
| |
more | Tamiya 1/35 German Panzer Kampfwagon IV WW2 Tank Kit (35096)
Over 200 AusfD models were built serving in the Polish,Norwegian and French campaigns. New features on the AusfD included an external gun mantlet with 35mm
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German Flakpanzer Gepard Modern Anti Aircraft Tank (35099)
| |
more | Tamiya 1/35 British Churchill Crocodile c/w Trailer (35100)
| |
more | Tamiya 1/35 German 20mm Flak 38 (35102)
paints required: X10, XF1, XF64more.. | |
more | Tamiya 1/35 US M113A1 Fire Support Vehicle Kit (35107)
| |
more | Tamiya 1/35 Russian T-62A Main Battle Tank Kit (35108)
| |
more | Tamiya 1/35 West German Leopard A4 Main Battle Tank Kit (35112)
| |
more | Tamiya 1/35 M106A1 S.Propelled Mortar (35116)
| |
more | Tamiya 1/35 US M48A3 Patton Tank Kit (35120)
| |
more | Tamiya 1/35 US WW2 Infantry Weapons Set (35121)
| |
more | Tamiya 1/35 US M151 Ford Jeep Mutt (35123)
Require Paints & Glue to Complete | |
more | Tamiya 1/35 US M151A2 Missile Launcher Modern (35125)
US M151A2 Missile Launcher Modern | |
more | Tamiya 1/35 US M151A2 Ford Mutt with Trailer (35130)
| |
more | Tamiya 1/35 Japanese Type 97 WW2 Medium Tank Kit (35137)
| |
more | Tamiya 1/35 US M4 Sherman A3 B2 Jumbo Assault Tank Kit (35139)
more.. | |
more | Tamiya 1/35 German Tiger I Tank Late Version WW2 tank Kit (35146)
| |
more | Tamiya 1/35 German Halftrack Kfz.251/9 Ausf.D 7.5cm Kanonenwagon (35147)
| |
more | Tamiya 1/35 SDkfz.251/1 Ausf.D Stuka ZU Fuss German Halftrack (35151)
more.. | |
more | Tamiya 1/35 US M2A2 Bradley Armoured Fighting Vehicle (35152)
| |
more | Tamiya 1/35 British Challenger 1 Tank MKIII Modern (35154)
Entering British military service in 1983 the Challenger was to demonstrate its capabilities during the 1991 Gulf conflict armed with its powerful 120mm gun and additional armour side skirts from Chobham armour as a modification,painted overall sand they were able to maintain over 90% availability for service earning respect from all involved. The kit also offers the option to build the Nato declared black and green scheme. Requires polystyrene cement and paint to complete the modelmore.. | |
more | Tamiya 1/35 US M1A1 Abrams Main Battle Tank Modern (35156)
| |
more | Tamiya 1/35 US Marine Corp M60A1 with Reactive Armour Modern (35157)
| |
more | Tamiya 1/35 US M1A1 Abrams MBT with Mine Plough (35158)
| |
more | Tamiya 1/35 German Marder 1A2 APC (35162)
The highly successful and sophisticated German Marder entered active service in the early 1970's. The Marder 1A2 is an upgraded version that features a Milan anti tank missile system.
Requires polystyrene cement to build the model, suggested basic colours olive drab, dark green, red brown, metallic grey | |
more | Tamiya 1/35 German King Tiger Production Turret WW2 Plastic Kit (35164)
| |
more | Tamiya 1/35 German King Tiger Tank Porshe Turret WW2 (35169)
| |
more | Tamiya 1/35 Panther Type G Early Version Plastic Tank Kit (35170)
| |
more | Tamiya 1/35 Panther G Separate Track Links (35171)
| |
more | Tamiya 1/35 German Photo Etched Grill for Panther Type G (35172)
| |
more | Tamiya 1/35 German Panther 75mm Projectiles Brass (35173)
| |
more | Tamiya 1/35 Panther Type G Steel Wheel Version German Tank Kit (35174)
Because of its many advanced and innovative features, the World War II German Panzerkampfwagen V, known as the "Panther" tank, is still considered by many ordnance experts as a weaponry masterpiece. The development of the Panther came about due to the successes generated by the Russian T-34, which has become a serious threat to the German forces during the mid part of the conflict. Mass production of the Panther began during the spring of 1943, and with its sophisticated mechanics and powerful Type 42 L70, 70mm main gun, the Panther tank demonstrated its formidable strength during front line action shortly after its introduction. Several improvements were suggested following its initial employment, resulting in the Panther Type G, which began to appear in spring 1944. Major improvements consisted of additional side armor slope angles and simplified assembly refinements for mass production. The powerplant of the Type G Panther was a Maybach HL230-P30, V-12 cylinder, watercooled engine producing 700 horsepower. In order to further enhance productivity and compensate for the lack of raw materials, a handful of trial production Panthers were mounted with steelwheels for testing pruposes. These were steel rimmed wheels replacing the conventional rubber rims, and were insulated from the hubs by two rubber rings clamped between disc-shaped pressings. The steel-wheeled Panther Type G's were very rarely seen during combat. | |
more | Tamiya 1/35 British WW2 Universal Carrier MkII with Bren Gun (35175)
The Universal Carrier had an open top crew compartment on each side of the engine compartment and a lightly armoured superstructure. The Ford V-8 engine provided a 48km/h top speed.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German Panther G Tank Late Version Tank Kit WW2 (35176)
Because of its many advanced and innovative features, the WWll German Panther is still considered by many ordinance experts as a weaponry masterpiece.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German Sturmtiger Assault Tank 38cm Mortar WW2 (35177)
| |
more | Tamiya 1/35 PZ.IV Ausf J German WW2 Tank Kit (35181)
The Panzerkampfwagen lV was Germany's most important tank during the second world war. It remained in mass production throughout the conflict, with more than 8000 units being produced. With the introduction of the new Tiger and Panther tanks the Pz. Kpfw. lV began to serve in a defensive capacity.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 PZ.Kpfw.IV Brass Projectiles 75mm (35182)
| |
more | Tamiya 1/35 Pz.Kpfw.IV Photo-Etched Parts (35183)
| |
more | Tamiya 1/35 Panzerkampfwagen IV On Vehicle Equipment Set (35185)
| |
more | Tamiya 1/35 German Fuel Drums WW2 Accessory Set (35186)
| |
more | Tamiya 1/35 Tiger I Brass 88mm Projectiles German (35189)
| |
more | Tamiya 1/35 US M4 Sherman tank Kit Early Production WW2 (35190)
The Sherman was the motive power that brought victory to the Allies during WW2. It had superb mobility and superior numbers which compensated for its small Gun (75MM).
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 M4 Sherman Brass 75mm Projectiles (35191)
| |
more | Tamiya 1/35 German Tiger 1 Mid Production Plastic Kit (35194)
To counter the Russian T34 tank threat the GermanTiger 1 heavy tank was placed into service during 1942. In January 1944 the pistol ports were eliminated . The large diameter rubber rimmed road wheels were still used. Tigers produced from July 1943 to January 1944 featured these modifications and are referred to as mid production.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German Mtl.SPW SDkfz.251 Ausf D Halftrack (35195)
Of the many variables that take place during any conflict, supply and mobility are the most pressing. Germany realized this fact very early in World War 2 and demonstrated use of support vehicles during their early "Blitzkriegs". They had developed a great number of vehicles for differing purposes, and a very successful on was the Sd.Kfz. 251 half-track. This semi-tracked vehicle became the centerpiece of their mechanized corps throughout the conflict. Production began in 1939, and the series is broken down into four types, from Ausf.A to D. according to the differences in design and its production period. Early models used a very complicated hull construction, made up of obliquely placed armor plating. This was somewhat simplified in the C and D types, to make mass production easier. The final "D" version appeared in 1943, and it became the most widely used model of the four versions. Of the many types produced, the basic personnel carrier was the Dd.Kfz. 251/1. Powered by the Maybach HL42 six cylinder engine, it had a top speed of 53km/h and a range of 300km. It was armed with two MG42 machine guns plus automatic rifles for the crew, and could carry twelve fully equipped soldiers. This versatile half track was also the basis for a wide variety of self-propelled weapon systems, which were mounted to its chassis. More than 10,000 of the D type half-track and its variants were produced. | |
more | Tamiya 1/35 SDkfz.142/1 Sturmgeschutz 111 Ausf WW2 Kit (35197)
Originally intended for infantry support duties the Stug lll first appeared in combat during 1940. To cope with the Russian tanks the G-type Stug lll built from 1942 onwards used a more powerful long barrel 75mm gun redesigned superstructure and a MG34 machine gun with shield.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 Etched Grill For German Stug 111 (35199)
| |
more | Tamiya 1/35 Sdkfz.124 Wespe Self Propelled Howitzer German (35200)
more.. | |
more | Tamiya 1/35 German Jagdpanther Tank Late Version WW2 (35203)
German Jagdpanther Tank Late Version - WW2 more.. | |
more | Tamiya 1/35 U.S WW2 Infantry Equipment Set (35206)
| |
more | Tamiya 1/35 German Panzer IV Ausf H WW2 Tank Kit (35209)
| |
more | Tamiya 1/35 British Churchill Tank Mk 7 WW2 Tank Kit (35210)
Despite the serious teething problems in its mechanics the British Infantry Tank Churchill went on to earn a high reputation among the WW2 British armoured fighting vehicles. The Mk. Vll was radically different from earlier models with the hull and turret having a completely new structure.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German Kubelwagen Type 82 WW2 kit (35213)
| |
more | Tamiya 1/35 German Tiger 1 Tank Early Production WW2 (35216)
more.. | |
more | Tamiya 1/35 U.S Cargo Truck 2.5 Ton 6X6 Utility Truck (35218)
more.. | |
more | Tamiya 1/35 Kubelwagen Engine Set Kit (35220)
| |
more | Tamiya 1/35 British Cromwell Tank MK 2 WW2 (35221)
The Cromwell was a fast and reliable tank capable of speeds of over 65 m/h on a good surface. Most were armed with the 75mm gun chambered to fire American ammunition well able to destroy enemy tanks at long range.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 Cromwell Photo Etched Grill Set (35222)
| |
more | Tamiya 1/35 German Schwimmwagen Type 166 WW2 (35224)
Pkw. K2s Schwimmwagen Type 166. A total of 14,276 type 166's were produced by the end of 1944.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German Steyr 1500A/0 Command car Kit (35225)
| |
more | Tamiya 1/35 German Steyr 1500A/0 Photo-Etched Grille (35226)
| |
more | Tamiya 1/35 US M8 Greyhound Armoured Car Kit (35228)
The M8 Greyhound was used during World War ll primarily as an escort and reconnaissance vehicle. From March 1943 to April 1945 over 8523 M8's were produced.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 US 40 Ton Tank Transporter Dragon Wagon (35230)
During the Second World War, the development of heavy tanks continued at a fevered pitch. To deploy these tanks to the front line, or retrieve them when damaged or broken, the necessity of a large-scale transport vehicle was heightened. In April of 1943, the U.S. started production of "The Dragon Wagon", one of the biggest tank transport vehicles of WWII. Constructed around an armored cabin and a sturdy trailer, it boasted a loading capacity of 40 tons. Also assisting in the transport of boats for river crossing operations, the Dragon Wagon was a great advantage to the advancement of the Allied Forces. | |
more | Tamiya 1/35 US 6x6 2.5 ton Truck Accessory Set (35231)
| |
more | Tamiya 1/35 British Centaur C S MK4 Tank Kit WW2 (35232)
Plastic assembly model based on the Centaur C.S. Mk. IV British Cruiser Tank Mk. VIII, A27L, which fought in the Normandy Invasion. The linearly constructed turret with sturdy rivets as well as the short yet stout cannon gives the tank a unique shape, which has been realistically recreated.
For firing while still aboard a landing vessel, the Centaur was given various calibration markings on its turret. These markings are included as decals.<
Figures for the commander as well as the loader are also included.more.. | |
more | Tamiya 1/35 German Quad Flakpanzer Wirbelwind WW2 Plastic kit (35233)
The forte of the Wirbelwind was its exceptional rotating turret protected by no less than eighteen,16mm thick armoured plates. The open top turret provided just enough space for the gunner and two loaders to operate effectively. The Wirbelwind could carry 3200 rounds of ammunition for its four 20mm Flak guns firing 800 rounds a minute.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 US M20 Armoured Utility Vehicle WW2 Recon Car Kit (35234)
| |
more | Tamiya 1/35 Steyr German Commanders Car (35235)
In the early half of World War II, the mechanized units of the German army recorded many victories by employing the "Blitzkrieg" strategy. These triumphs can be attributed to both the fighting units on the front lines and the clever strategies and know-how of the commanders. To move these high ranking commanders from place to place, various vehicles were necessary. One of those vehicles was the Kommandeurwagen, produced by the Austrian firm, Steyr. Its development was based on the military transport vehicle, Steyr 1500A/01, produced in accordance with the vehicle standardization "Schell Programme" of 1940. Developed using the chassis of a 1500A truck, the 1500A/01 housed an eight cylinder, eighty-five horse power gasoline engine, a four forward/one reverse gear transmission, a front wheel torsion bar, and a leaf spring rear suspension. The Wehrmacht, impressed with the maximum speed of 100km/h on paved roads and excellent running performance, ordered the Steyr firm to produce a modified version for command use. In contrast to the eight passenger capacity of the 1500A/01, the Steyr Kommandeurwagen, which was designed for comfort, had a capacity of only five passengers. All of the seats were leather and the fight front seat could be reclined and used as a bed. The Kommandeurwagen's role as the wheels for the "elite" of the German army stretched from Russia to North Africamore.. | |
more | Tamiya 1/35 German Self Propelled Mobelwagen 3.7cm PZ.KPFWIV (35237)
This is the plastic model assembly kit based on the German Self Propelled AA Gun Möbelwagen.
Overall length: 168mm, overall width 82mm.
The unique style of the Flak 43 equipped mass production model has been realistically recreated.
Gun barrel of Flak 43 and sighting device move together on arm to enhance authenticity. Ammunition ejection net has been recreated with nylon mesh for added realism.
Sliding hatch on the upper chassis has been included as a separately molded part. Unique cylindrical exhaust pipes have also been included.
Armoured plates protecting firing deck can be modeled in three positions for times of: movement, anti-aircraft firing, and horizontal firing.
Kit includes one skyward gazing crew figuremore.. | |
more | Tamiya 1/35 Kubelwagen 82 Afrika Korps (35238)
Because of its reliability and ease of repair,and since the engine did not require a coolant, the Kubelwagen proved particularly effective in North Africa. In 1942 a continental balloon tyre version went into production, approx 51,000 Kubelwagen Type 82 were produced by the end of the war.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German Motorcyle Orderly Set (35241)
Established in 1919, the German motorcycle manufacturer DKW earned international acclaim in the thirties as a producer of finely crafted two-stroke racing motorcycles. It was at this period that the reconnaissance division of the Wehrmacht, focused on mechanization, was accelerating the deployment of motorcycles. At first, the Wehrmacht did not express an interest in the two-stroke engine produced by DKW. In 1938, however, they decide to adopt the 11hp single cylinder two-stroke engine equipped DKW NZ 350 medium cycle. In 1940, production was started on the NZ 350/1 version, specially modified for the Wehrmacht. This new model featured a cast iron engine block, centrifugal air filter, and strengthening braces from the frame to an added luggage carrier. Although it proved unsuitable for heavy cross country use, its light weight and easy handling mad it ideal as a courier cycle in Europe, North Africa and Russia well into World War II. | |
more | Tamiya 1/35 German Leopard 2 A5 Main Battle Tank Modern (35242)
| |
more | Tamiya 1/35 German 18t Tank Recovery Set (35243)
| |
more | Tamiya 1/35 US M26 Armoured Tank Recovery Vehicle (35244)
more.. | |
more | Tamiya 1/35 German Marder 3 Assault Gun WW2 (35248)
| |
more | Tamiya 1/35 British Universal Carrier Mk2 Forced Reconnaissance WW2 (35249)
Produced from late 1942 it was improved with welded and waterproofed hull. Production totalled over 100,000 Units In 1944 the Motor battalion was equipped with the carrier and was often seen with Cromwell, Churchill and Sherman tanks in forward areas.
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 M4A3 Sherman 75mm Late American Tank Kit (35250)
US Medium tank late production with 75mm Gun
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 US M4A3 Sherman with 105mm Howitzer WW2 (35251)
Conceived as a close support tank for assault operations this version of the Sherman carried the 105mm Howitzer. Included are four figures to offer greater diorama options. Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 German King Tiger Kit Ardennes WW2 (35252)
Tamiya presents a 1/35 scale model of the King Tiger as it appeared during the final German offensive on the Ardennes Front. Also included in the kit is the DKW NZ350 military motorcycle. The thick armour and powerful 88mm gun of the King Tiger's Henschel turret struck fear in the hearts of all Allied troops that had the displeasure of facing this beast of a tank. In true Tamiya style, the King Tiger's fearsome image is captured in this model. Overflowing with detail, the kit features two different types of gun mantles (model can be assembled with stepped and sloped mantle), as well as parts for the accurate replication of the DKW NZ350's engine. Small headlight and other features seen on the motorcycle during the final stages of World War II are reproduced. Great for making the perfect Ardennes diorama. Tank commander, tank crewman and orderly figures (3 figures in all) have also been included in this kit.
Requires polystyrene cement to build the model, suggested basic colours hull red, sand, dark green
more.. | |
more | Tamiya 1/35 US M26 Pershing Medium Tank Kit (35254)
U. S. Medium Tank M26 Pershing Features
Length: 245mm, Turret with its 90mm long barrel gun and boat hull like underside, have been faithfully reproduced with an incredible level of detail. Crew hatches can be assembled in either the opened or closed position. Movable suspension forms to the landscape of dioramas. Small details like separate parts for the engine grills and cast iron appearance on the hull and the turret make kit seem even more real.
Machine gun ammunition boxes and two crew figures (torso) are included. Decals for 4 different markings.
Requires polystyrene cement and paint to complete the model, suggested basic colours olive drab, metallic grey, flesh
more.. | |
more | Tamiya 1/35 German Marder 3 M Tank Destroyer Kit WW2 (35255)
Total length: 149.5mm The particular form of the Marder with its combat compartment placed to the rear has been recreated in superb detail. The 7.5cm Pak40/3 main gun, ammunition rack and radio equipment have been accurately reproduced. Characteristic sprockets and idlers have been replicated. Muffler cover comes as a photo-etched part. One figure and decals for 5 different markings for armor from various battlefronts are included. more.. | |
more | Tamiya 1/35 Russian T-55A Medium Tank Kit (35257)
Requires polystyrene cement and paint to complete the model | |
more | Tamiya 1/35 Marder 111 M 7.5CM Brass Projectiles (35258)
| |
more | Tamiya 1/35 German Kruppe Towing Truck with 37mm Pak with Crew (35259)
Overall length: 250mm Every characteristic of this truck such as the low-profile bonnet, the chassis, the ammunition boxes and the crew seats on the rear part, as well as the spare wheel for the anti-tank gun has been realistically reproduced. A 3.7cm Pak anti-tank gun and various accessories are part of the set. 4 all-new figures and decals for 4 different markings are included.more.. | |
more | Tamiya 1/35 German Panther Type G with Eduard Photo Etched Parts (35261)
| |
more | Tamiya 1/35 German Pz.kpfw lV with Eduard Photo Etched Parts) (35262)
| |
more | Tamiya 1/35 US Army M1025 Humvee Armament Carrier (35263)
1/35 Scale Overall length: 137mm The unique form of the Humvee has been accurately reproduced. You can choose between 2 types of bonnet vents. Front guard has also been replicated down to the finest detail. Tires are made out of rubber. Mk.19 Grenade launcher, M2 machine gun, ammunition boxes as well as two figures are part of the kit. Includes decals for 4 different markings.more.. | |
more | Tamiya 1/35 US Army M2A2 Bradley ODS IFV Gulf War (35264)
Overall length 193mm Laser range finder, GPS antenna, rear sensors and box exhaust have been accurately replicated. Comes with option of two 25mm cannons. Tracks with highly durable pads CIP attached on both sides and the rear. Plenty of extra attachments including personnel equipment such as alice packs and sleeping bag. Body armor wearing commander and gunner half-figures included. Decals for 3 different vehicles deployed to Iraq and 3 different vehicles deployed on NATO operations. more.. | |
more | Tamiya 1/35 US Army M113A2 APC Gulf Version (35265)
Overall length 153mm Large trim vane, smoke shell launcher, and external fuel tanks have been accurately replicated. CIP attached on both sides. Gun shield can be attached to M2 machine gun. Plenty of extra attachments including personnel equipment and ammo cases. Commander and driver figures included Decals for 3 different vehicles deployed to Iraq and one vehicle deployed to Bosnia-Herzegovina. more.. | |
more | Tamiya 1/35 US Modern Military Equipment Set (35266)
A set perfect for reproducing a load usually carried by modern U.S. military vehicles. Comes with various personnel equipment, ammunition boxes, food ration boxes, and CIP (Coalition Identification Panels) for M1025 Humvee | |
more | Tamiya 1/35 US M1046 Humvee with TOW Missile (35267)
Overall length: 137mm Accurate replication of body provides real sense of striking power TOW missile launcher includes all extra attachments Features precise detailing of reinforced doors, and missiles, tripod and containers stored in the rear. Extra attachments such as front self-recovery winch, CIP panels and bush guard included in kit. Two types of side mirrors and bonnet grill to choose from Air intake and muffler for marines division version also included Comes with one driver and operator figure Markings for four different vehicles including the 1st Marine Division, 3rd Infantry Division and KFOR unitsmore.. | |
more | Tamiya 1/35 American M1A2 Abrams Main Battle Tank OIF (35269)
U.S. M1A2 Abrams 120mm Gun Main Battle Tank
The M1 Abrams, the worlds' strongest tank, has undergone step-by-step modification since its commission by the US military in 1980. The M1A2 evolved from the M1A1HA, and features Intervehicular Information System (IVIS) and Commander's Independent Thermal Viewer (CITV). Kit features A2 turret comes with CITV and new style vision block.
Basic Specifications
Overall length: 283mm
Overall width: 105mm
Parts used to reproduce M1A1HA also included.
Parts used to reproduce Marine Corps version included.
Combat Identification Panels (CIP) and Auxiliary Power Unit (APU) accessories.
Commander and loader half body figures.
Markings for desert and NATO vehicle
more.. | |
more | Tamiya 1/35 German Sd.Kfz.222 Armo |
Antics
Search
Index
Checkout
Back