Humbrol Decalfix 28ml Bottle (DF28 AC6133)

A water-based liquid ideal for softening and applying decals.

Humbrol Modelcote 28ml Gloss Cote Varnish (GC28 AC5500)

Modelcote Gloss Cote is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth, high-sheen gloss finish.

Humbrol Modelcote 28ml Matt Cote Varnish (MC28 AC5600)

Modelcote Matt Cote is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth, low-sheen matt finish.

Humbrol Modelcote 28ml Satin Cote Varnish (SC28 AC5400)

Modelcote Satin Cote is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth, mid-sheen satin/eggshell finish.

Humbrol Clearfix 28ml Bottle (CF28 AC5707)

A solvent based adhesive for bonding clear parts together protecting the translucency of the plastic.

Humbrol Maskol Masking Fluid 28ml Bottle (MK28 AC5217)

An easy to use rubber based solution that stops surfaces being painted once applied and can then be simply removed by peeling off.

Humbrol Antique Gold 400ml Just Metallics Spray (JM400/AGL)

Humbrol Just Metallic Spray Paints is a very high quality and give a highly realistic bright 24ct Gold finish, dry in just 10 minutes. They are suitable for interior decorative use only, on surfaces which will not be touched.

Microscale Microscale Micro Set Decal Application Solution (MI1)

Micro Set is a very versatile decal setting solution that does several things to the Microscale Decals to improve application. Micro Set should be applied to the surface of the model where you will be sliding off the decal. Micro Set prepares the surface with special wetting agents that cuts the oils in new paint and converts the adhesive on the back of the decal to a stronger and more lasting one. And finally, Micro Set slightly softens the decals film to make it more flexible so that it can conform better to the model's surface. Better adhesion by the decal to the model prevents tiny air bells from occurring and results in an invisible carrier film or the so called 'painted on look'.

Microscale Microscale Micro Sol Decal Setting Solution (MI2)

Micro Sol setting solution is for the most difficult irregular surfaces you find on models. It completely softens the Microscale Decal allowing it to drape down onto the surface of the model conforming perfectly and without distortion. You can get the most amazing results in seemingly impossible places, because Micro Sol actually makes the decal part of the paint. For that reason you should coat Micro Sol on for only a few seconds and then leave it alone, it does the work. Do not touch until dry as the decal is very soft at this stage and could be easily damaged.

Microscale Microscale Liquid Decal Film (MI12)

Everyone should have Micro Liquid Decal Film who models and uses decals. Especially if you have been at it for some time. The typical decal scrap box is not the best place to store decals. Exposed to air, sunlight, and moisture, great swings of temperature or general abuse, and decals will go bad. Or maybe you just always had trouble putting on thin stripes. Micro Liquid Decal Film solves all of those problems and makes a decal which for whatever reason is bad, work again just like new almost immediately. Of course if you have already put it in water it is too late. So if you have some old decals you really have to use, coat them with Micro Liquid Decal Film to be sure. Or if there is any indication that you might have a problem, don't take a chance, you can solve the problem on the spot. Simply take a small brush and coat the image on the decal you want to use. Allow to dry for 20 minutes. Apply the decal as usual. It's that simple.

Microscale Micro Flat Clear Finish Water Based 1fl Oz (BMF133)

A superior flat finish for modellers designed to be airbrushed,can be thinned with water,or application by soft brush.Clean up is simple using water whilst dtill wet.

Testors Model Master Dried Paint Solvent for Acrylic & Enamel (50495)

Used for cleaning dried Acryl/RC Acryl paint.

HMG/Spectra Cellulose Thinners 125ml (HMG30)

For thining cellulose dope, along with many other uses.

HMG/Spectra Cellulose Thinners 250ml (HMG31)

Revell Decal Softener 30ml (39693)

K&S Flexible Wet & Dry Sanding Film Regular Grade Asstd. (4300)

K&S Flexible Wet & Dry Sanding Film Micro Fine Grade Asstd. (4301)

Carrs Transfix Decal Varnish (C1203)

Testors Dullcote Clear Finishing Lacquer (1260)

Testors Desert Sand Enamel Spray Modern FS33722 85g Can (1963)

AK Interactive 2mm Realistic Light Lenses Colour White (206)

AK Interactive 2mm Realistic Light Lenses Colour Red (207)

AK Interactive 3mm Realistic Light Lenses Colour Red (213)

AK Interactive 2mm Realistic Light Lenses Colour Optic (224)

K&S Flexible Wet & Dry Sanding Film Coarse Grade Asstd. (4302)