more | Peco OO Setrack OO/HO Starter Track Set (ST100)
Build your own train set with this track starter set containing sufficient track sections to construct and oval measuring 1626 x 991mm (64 x 39in) with two additional sidings. A number of track layouts are possible and a plan book is inlcuded. | |
more | Hornby OO Track Templates 1/4 Scale (R619)
Design your track layout with these quarter scale plastic track pieces. Pack contains more than 100 sections which clip together to build your track layout in miniature | |
more | Peco OO Setrack OO/HO Planbook (STPOO)
| |
more | Hornby OO Track Extension Pack A (R8010)
Track expansion pack for large Hornby Trackmat system. Pack A contains 5 R600 standard straights, 1 R606 standard 2nd radius curve, 1 R8072 left-hand point and 1 R083 buffer stop. This allows the basic track oval to be extended and a siding added. | |
more | Hornby OO Track Extension Pack B (R8016)
Track expansion pack for large Hornby Trackmat system. Pack A contains 5 R600 standard straights, 1 R606 standard 2nd radius curve, 1 R8073 right-hand point and 1 R083 buffer stop. This is intended to add two sidings in the centre of the Hornby Trackmat, but can also be used to add alternative sidings, or combined with Track Pack A to form a passing loop. | |
more | Hornby OO Extension Pack A (R8221)
Add extension pack A to the starter oval supplied with the smaller Hornby train sets to make this layoutmore.. | |
more | Hornby OO Extension Pack B (R8222)
Add pack B to the starter oval + A to make this layoutmore.. | |
more | Hornby OO Extension Pack C (R8223)
Add pack C to the starter oval + A + B to make this layoutmore.. | |
more | Hornby OO Extension Pack D (R8224)
Add pack D to the starter oval + A + B + C + D to make this layoutmore.. | |
more | Hornby OO Extension Pack E (R8225)
Add pack E to the starter oval +A +B+C+Dto make this layoutmore.. | |
more | Hornby OO Extension Pack F (R8226)
Add pack F to the starter oval+A+B+C+D+F to achieve the full TrakMat layoutmore.. | |
more | Peco OO Setrack Standard Straight 168mm (ST200)
Standard straight track, length 168mm.
Equivalent to Hornby R600 track unit. | |
more | Hornby OO Standard Straight (R600)
Standard length straight track section Length 168mm
Please see equivalent Peco track section ST200. | |
more | Hornby OO Power Track (R8206)
A standard straight track with power connection. Suitable for 12-volt and live steam power connection. | |
more | Peco OO Setrack Isolating Standard Straight 168mm (ST205)
Isolating track section with switch. Length 168mm (as ST200 and Hornby R600), | |
more | Hornby OO Double Isolating Track (R618)
Length 168mm (as R600), used to isolate track sections, can be wired via on - off switch. | |
more | Hornby OO Standard Straight Uncoupler/Re-railer Track (R620)
Length 168mm (as R600), used to uncouple rolling stock and will rerail any derailed trains as it passes | |
more | Peco OO Setrack Double Straight 335mm (ST201)
Double length straight track section, length 335mm
Equivalent to Hornby R601 double straight track section | |
more | Peco OO Setrack Long Straight Length 670mm (ST204)
Long, quad-length straight track section, length 670mm (approx 26 3/8in)
Equivalent to Hornby R603 long straight track section. | |
more | Hornby OO Flexible Track (R621)
| |
more | Hornby OO Semi Flexible Track (R8090)
Minimun order Six | |
more | Peco OO Setrack Standard Curve No1 Radius (ST220)
Standard curve section number 1 radius 371mm (14 5/8in). 22.5 degree curve, 16 required to form a complete circle. | |
more | Hornby OO Curve 1st Radius (R604)
Radius 371mm | |
more | Peco OO Setrack Double Curve No1 Radius (ST221)
Double curve section number 1 radius 371mm (14 5/8in). 45 degree curve, 8 required to form a complete circle. | |
more | Hornby OO Double Curve 1st Radius (R605)
Radius 371mm | |
more | Peco OO Setrack Standard Curve No2 Radius (ST225)
Standard curve section number 2 radius 438mm (17 1/4in). 22.5 degree curve, 16 required to form a complete circle. | |
more | Hornby OO Curve 2nd Radius (R606)
Radius 438mm | |
more | Bachmann OO 2nd Radius Curve (606)
2nd radius curve track section, 16 required for a complete circle. Radius 438mm (17¼in)
Equivalent to Hornby R606 2nd radius curve track section. | |
more | Peco OO Setrack Double Curve No2 Radius (ST226)
Double curve section number 2 radius 438mm (17 1/4in). 45 degree curve, 8 required to form a complete circle. | |
more | Hornby OO Double Curve 2nd Radius (R607)
Radius 438mm | |
more | Bachmann OO 2nd Radius Double Curve (607)
2nd radius double length curved track section, 8 required for complete circle. Radius 438mm (17¼in)
Equivalent to Hornby R607 2nd radius curve section. | |
more | Peco OO Setrack Standard Curve No3 Radius (ST230)
Standard curve section number 3 radius 505mm (19 7/8in). 22.5 degree curve, 16 required to form a complete circle. | |
more | Hornby OO Curve 3rd Radius (R608)
Radius 505mm | |
more | Bachmann OO 3rd Radius Curve (608)
3rd radius curved track section, 16 required for complete circle. Radius 504mm (approx 19¾in)
Equivalent to Hornby R608 3rd radius curve section. | |
more | Peco OO Setrack Double Curve No3 Radius (ST231)
Double curve section number 3 radius 505mm (19 7/8in). 45 degree curve, 8 required to form a complete circle. | |
more | Peco OO Setrack No.4 Radius Curve (ST235)
A new larger radius Setrack curve, No.4 radius is 22.5in, ideal for large locomotives and realitsic operation of long coaches and wagons.
Track section is 22.5 degrees, 16 units required for a complete circle. | |
more | Hornby OO 4th Radius Curved Track (R8261)
| |
more | Hornby OO Double 4th Radius Curved Track (R8262)
| |
more | Peco OO Setrack Right Hand Turnout No2 Radius (ST240)
Right hand Setrack turnout with insulated frog.
Radius 17¼in (438mm), angle 22½ degrees, length 168mm (6 5/8in).
Points are interchangable with ST200 (Hornby R600) straight and ST225 curve track sections. | |
more | Bachmann OO Standard Point Right Hand (8073)
The standard right hand point has a 2nd radius diverging curved section equal to a standard curve, while the point unit itself is the same length as a standard straight track section.
Length 168mm (approx 6 5/8in), curve radius 438mm (17¼in). To run tracks parallel use 606 2nd radius curve. | |
more | Peco OO Setrack Left Hand Standard Point No2 Radius (ST241)
Left hand Setrack turnout with insulated frog. Equvilent to Hornby R8072 point.
Radius 17¼in (438mm), angle 22½ degrees, length 168mm (6 5/8in).
Points are interchangable with ST200 (Hornby R600) straight and ST225 curve track sections. | |
more | Bachmann OO Standard Point Left Hand (8072)
The standard left hand point has a 2nd radius diverging curved section equal to a standard curve, while the point unit itself is the same length as a standard straight track section.
Length 168mm (approx 6 5/8in), curve radius 438mm (17¼in). To run tracks parallel use 606 2nd radius curve. | |
more | Peco OO Setrack Right Hand Double Radius Curved Turnout (ST244)
Right hand Setrack curved turnout with insulated frog.
Internal radius 17¼in (438mm), external radius 19 7/8in (505mm).
Special curve ST227 and special straight ST203 units may be required to match other track sections in your layout. | |
more | Hornby OO Curved Point Right Hand (R8075)
Each radius 438mm | |
more | Peco OO Setrack Left Hand Double Radius Curved Turnout (ST245)
Left hand Setrack curved turnout with insulated frog.
Internal radius 17¼in (438mm), external radius 19 7/8in (505mm).
Special curve ST227 and special straight ST203 units may be required to match other track sections in your layout. | |
more | Hornby OO Curved Point Left Hand (R8074)
Each radius 438mm | |
more | Peco OO Setrack Y Turnout (ST247)
Setrack Y turnout with insulated frog. Both diverging tracks are curved in this turnout. Special curve ST222 is required to create parallel tracks.
Radius 33 27/32in (859.6mm), angle 11.25 degrees, length 170mm (6 11/16in). | |
more | Peco OO Setrack Special Curve (ST238)
Special curve section for use with Y turnout ST247. Radius 859.6mm (33 27/32in). 11.25 degree curve, 32 required to form a complete circle. | |
more | Hornby OO Y Point (R8076)
Each radius 852mm, to create parallel tracks use two R628 special curves. | |
more | Hornby OO Half Curve Large Radius (R628)
Radius 852mm, for use with R632 Y point | |
more | Bachmann OO Standard Y Point (8076)
Each radius 852mm, to create parallel tracks use two 628 curves. | |
more | Bachmann OO Large Curve for Y Points (628)
Designed for use with standard Y points to create two parallel tracks. Radius 852mm (33½in)
Equivalent to Hornby R628 curved track section. | |
more | Hornby OO Express Point Right Hand (R8078)
Length 245mm, radius 852mm | |
more | Hornby OO Express Point Left Hand (R8077)
Length 245mm, radius 852mm | |
more | Peco Side Mounted Point (Turnout) Motor (PL11)
This point motor is designed to mount alongside a point, avoiding the need to cut a hole into the baseboard to fit a motor below each point.
Note that the green wire is the common return wire. | |
more | Hornby OO Point Motor (R8014)
Powerful solenoid point motor, may be mounted above or below baseboard, powered from 16v AC supply. Requires Passing Contact Lever Switch (R044) | |
more | Hornby OO Point Motor Housing (R8015)
For fitting point motors above baseboard | |
more | Peco Point Motor (PL10)
The point motor attaches directly to the underside of the turnout to ensure positive and reliable operation. Requires a 40 x 25mm hole in the baseboard to accomodate the motor. Operation is from a passing contact switch or probe and stud system to give a pulse from the 16v AC outlet found on most transformers (2 amps required). If this isn't available an uncontrolled 12v DC supply may suffice. A constant current would burn out the motor. | |
more | Peco Point Motor Extended Pin (PL10E)
The PL10-E point motor is fitted with a long point operating pin, ideal for mounting beneath baseboards. A small 10mm (3/8in) hole through the baseboard is required, located directly beneath the operating pin attachment location on the point. The pin will then reach through the board and locate into the operating pin attachment hole of the point. The pin can then be trimmed to length with a good side or track cutter tool. Peco strongly recommend that the PL10E be used in conjunction with a PL-9 Mounting Plate, fitted directly to the base board underneath the point. Operation is from a passing contact switch or probe and stud system to give a pulse from the 16v AC outlet found on most transformers (2 amps required). If this isn't available an uncontrolled 12v DC supply may suffice. A constant current would burn out the motor. | |
more | Peco Point Motor Low Current (PL10W)
This point motor is designed to operate with the lower amperage found on some European transformers or with DCC systems*. Operation is from a passing contact switch or probe and stud system to give a pulse from the 16v AC outlet found on most transformers. If this isn't available an uncontrolled 12v DC supply may suffice. A constant current would burn out the motor.
* Although the initial amperage from DCC systems is very high, say 10 amps, the final amps avaialble to accessories such as point motors is very low, once the current has passed through the booster units used in DCC systems. more.. | |
stock
info | Peco Point Motor Low Current Extended Pin (PL10WE)
A new point motor type from Peco incorporating the extended operating pin, allowing the motor to be mounted to the underside of baseboards, with the low current solenoid design.
These motors have a lower power consumption, designed with DCC systems in mind allowing these motors to be controlled by point/accessory decoders. more.. | |
more | Peco OO Setrack Medium Crossing Insulfrog (ST250)
| |
more | Hornby OO Diamond Crossing L/H (R614)
Length 168mm x 181mm | |
more | Hornby OO Diamond Crossing R/H (R615)
Length 168mm x 181mm | |
more | Peco OO Setrack Special Short Straight 41mm (ST203)
Special short straight track, length 41mm. | |
more | Peco OO Setrack Short Straight 79mm (ST202)
Short straight track, length 79mm | |
more | Hornby OO Short Straight (R610)
Length 38mm | |
more | Bachmann OO Short Straight (610)
Short straight track, length 38mm (1½in)
Equivalent to Hornby R610 short straight track section. | |
more | Peco OO Setrack Half Curve No1 Radius (ST222)
Half curve section number 1 radius 371mm (14 5/8in). 11.25 degree curve, 32 required to form a complete circle. | |
more | Peco OO Setrack Half Curve No2 Radius (ST227)
Half curve section number 2 radius 438mm (17 1/4in). 11.25 degree curve, 32 required to form a complete circle. | |
more | Hornby OO Half Curve 2nd Radius (R643)
Radius 438mm | |
more | Bachmann OO 2nd Radius Half Curve Track Section (643)
Half length 2nd radius curve track section. Radius 438mm (17¼in)
Equivalent to Hornby R643 half curve track section. | |
more | Peco Track Pins Fat Bag (ST280)
| |
more | Hornby OO Track Pins (R207)
Pack contains approximately 130 pins | |
more | Hornby OO Fishplates Pack Of 12 (R910)
| |
more | Peco OO Ballast Inlay for OO/HO Track - 5 metre Roll (SL50)
| |
more | Gaugemaster OO Ballasted Underlay 5m Roll (GM200)
A flexible polymer foam pre moulded to fit most OO/HO track with real granite stone, recesses are clear to take sleepers. | |
more | Hornby OO Roll of Track Underlay (R638)
Almost 5 metres of single track underlay | |
more | Peco OO Ballast Inlay R/H Turnout No.2 Radius (x2) (ST255)
| |
more | Peco OO Ballast Inlay L/H Turnout No.2 Radius (x2) (ST256)
| |
stock
info | Peco OO Ballast Inlay Curved R/H Turnout Double Radius (x2) (ST259)
| |
more | Peco OO Ballast Inlay Curved L/H Turnout Double Radius (x2) (ST260)
Ballast Inlay Curved L/H Turnout Double Radius (x2) | |
more | Peco OO Medium Radius Y Turnout Ballast Inlay x2 (ST262)
Medium Radius Y Turnout Ballast Inlay x2 | |
more | Peco OO Ballast Inlay Crossing Medium Radius (x2) (ST265)
Ballast Inlay Crossing Medium Radius (x2) | |
Railways
Search
Index
Checkout
Back